Sold FS/FT Subs and Amps

[nVRuckus 5,000+ posts]

12" Custom TC9 with RE Softparts and a Carbon Fiber dust cover. Made by TeamPSI - $230 shipped

no TS params we re ran on this by TeamPSI who built the sub

1200watts rms

dual 2 ohms

rec. box 2.5cuft tuned to 32hz

motor isnt pretty looking but the face is perfect and it runs perfect.

_________________________________________________________________

Hifonics BX1605D - $200 shipped

RMS @ 4-Ohm: 1 x 550-Watts

RMS @ 2-Ohm: 1 x 1100-Watts

RMS @ 1-Ohm: 1 x 1600-Watts

Super D-Class Amplifier Design

Accu-Cross™ Crossover Controls: Low-Pass, Band-Pass / Full / Hi-Pass Feature

I didnt get the remote gain knob with it.

_________________________________________________________________

Infinity Reference 1242W - $40 Shipped

Polypropylene Cone

Large-Roll Butyl Rubber Surround

Dual Stacked Magnets

Bumped Backplate

Vented Polepiece

Progressive Spider

Deep-Draw I-Beam Steel Basket

Cutout Diameter: 11 3/16"

Mounting Depth: 5 1/16"

Subwoofer SpecificationsSize: 12 inch

Rec. Sealed Box Dims: 1.25 - 1.25 cu.ft.

Rec. Ported Box Dims: 2 - 2 cu.ft

Free Air Usage: yes

Sensitivity: 93 dB

Frequency Response: 25-400 Hz

Recommended RMS Power: 300W

Peak Power Handling: 1200W

Impedance: dual 4 ohms subwoofer wiring options

_________________________________________________________________

Next ALS 16 Comps - SOLD

Trades I need an amp that can burp .35 ohms and get loud for a 18" MT, looking towards the orion 2500D, IA 20.1, VFL 150.1, them typ of amps.

references can be seen here

http://www.teamaudiodynamics.com/vb/viewtopic.php?t=25

Click to read more...

 

[nVRuckus 5,000+ posts]

still available.

 

[nVRuckus 5,000+ posts]

ttt

 

[nVRuckus 5,000+ posts]

bump

 

[iceteebone 5,000+ posts]

this sub hasn't sold yet? amazing how you can throw audiobahns on here and they are gone instantly //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[nVRuckus 5,000+ posts]

yeah, I know I can most likely ebay the amp but kinda hard to describe this sub to people not in the scene LOL.

 

[psych0ticnemes1 5,000+ posts]

What is the Coil config on the sub? Oh and someone needs to buy that infinity reference, I bought an older one with the creamish chrome cone and i am throwing it 1000 watts in a type R box right now (2.6 @34hz). Its not quite as loud as my type R but the R had 500 more watts. But the Infinity gets nasty low i really like its sound. It took 1000 watts for at least an hour and half straight and it wasn't warm and it didn't smoke.

I'm running an MTX 1501d to one right now... gain all of the way up (because i have the compression circuit on) and the the infinity takes it all day long. The SQ is surprising as is the output.

 

[lilmaniac2 5,000+ posts]

I'm running an MTX 1501d to one right now... gain all of the way up (because i have the protection circuit on) and the the infinity takes it all day long. The SQ is surprising as is the output.

and what exactly does the protection circuit have to do with the gain being all the way up ??

 

[psych0ticnemes1 5,000+ posts]

and what exactly does the protection circuit have to do with the gain being all the way up ??

compression circuit*** makes it so the amp never clips

 

[nVRuckus 5,000+ posts]

ttt

I think the MA Audio M1889I is back up for sale $80