Selling my Alpine Type R 10" MINT and MTX 2300x amp with no RCA problems.
MTX 2300x :
RMS Power measured at 12.5 Volts DC:
150 Watts x 2 into a 4 Ohm load with less than 0.05% THD+N
300 Watts x 2 into a 2 Ohm load with less than 0.1% THD+N
600 Watts bridged into a 4 Ohm load with less than 0.1% THD+N
Dynamic Power (IHF-202 Std) measured at 14.4 Volts DC
200 Watts x 2 into a 4 Ohm load
375 Watts x 2 into a 2 Ohm load
750 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
> or = 110dB A-Weighted
Damping Factor:
>200
Frequency Response:
20Hz-20kHz±0.25dB
THe good ol' days of A/B Amplifiers for clean sounds! Pushing the 10" so nicely, louder than some 15s ive heard! Box in pic tuned to 34hz. Selling WHOLE setup for $250.
MTX 2300x :
RMS Power measured at 12.5 Volts DC:
150 Watts x 2 into a 4 Ohm load with less than 0.05% THD+N
300 Watts x 2 into a 2 Ohm load with less than 0.1% THD+N
600 Watts bridged into a 4 Ohm load with less than 0.1% THD+N
Dynamic Power (IHF-202 Std) measured at 14.4 Volts DC
200 Watts x 2 into a 4 Ohm load
375 Watts x 2 into a 2 Ohm load
750 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
> or = 110dB A-Weighted
Damping Factor:
>200
Frequency Response:
20Hz-20kHz±0.25dB
THe good ol' days of A/B Amplifiers for clean sounds! Pushing the 10" so nicely, louder than some 15s ive heard! Box in pic tuned to 34hz. Selling WHOLE setup for $250.
