free box plans for 2 10" type r's

[Andrew_K 10+ year member]

i have 2 10" alpine type r subs, model swr-1042d dual 4 ohm.

would any of the free box plans ( i am thinking 3 cuft for the pair? if that sounds right..) in the help 101 section work with these subs and make them sound good? I'm not new to car audio, just the box aspect of it, i am learning as i go. i prefer ported!

thanks in advance!

Click to read more...

 

[Bettr n' Revrse 5,000+ posts]

Look at the "Free Box Plans" Sticky under the enclosure help section...

 

[Andrew_K 10+ year member]

i have seen that section, but which plan would suit that setup best is what i am asking.

 

[Andrew_K 10+ year member]

bump

 

[Andrew_K 10+ year member]

bump !

 

[Bettr n' Revrse 5,000+ posts]

Hmmm Ill check

 

[Bettr n' Revrse 5,000+ posts]

3 at 35 wouldnt be bad... 3.2 or a little bigger would be better Id bet though

 

[Andrew_K 10+ year member]

okay, does having them in the same chamber have a major affect than having a slot port between the two? could i fit 2 10's in the plans you mentioned?

 

[Bettr n' Revrse 5,000+ posts]

No they should be fine in the same chamber

 

[Andrew_K 10+ year member]

okay, i took another look and i can fit a 3.5 cube plan, which would be suited for daily driving the best?

 

[slvrado28z 10+ year member]

use the 3.5 tuned to 34

 

[Bettr n' Revrse 5,000+ posts]

use the 3.5 tuned to 34

Ya thatll be fine after displacement...

 

[Andrew_K 10+ year member]

i don't see that plan there.. you mean one of the 3.5 tuned to 32 plans?

 

[Andrew_K 10+ year member]

bump for a final answer, then I'm good to go

 

[slvrado28z 10+ year member]

yeah 32 would be fine