Ford Explorer

SO what's everyone got in their explorers? I have 4 hAvoc 15's in 12.5 cubes net to 31.25hz all with 1.5" thick walls. They're powered from an Autotek MX3000.1 at 4 ohms which is approximately 2400 watts, but the power is going to be upgraded soon.... I'd love to get a second mx3000.1. I have a kenwood 6.5 double din headunit with touch screen navi ect...... An orion 275SX for my Poly mids and a PPI Art Series A200 for my soon to be installed Vifa tweets from Ascendant and whatever 3 way xover I get. Running stock alt with 1/0awg and a D31 in the back with stock batt....... Stock electrical is of the strongest I've seen.

 
SO what's everyone got in their explorers? I have 4 hAvoc 15's in 12.5 cubes net to 31.25hz all with 1.5" thick walls. They're powered from an Autotek MX3000.1 at 4 ohms which is approximately 2400 watts, but the power is going to be upgraded soon.... I'd love to get a second mx3000.1. I have a kenwood 6.5 double din headunit with touch screen navi ect...... An orion 275SX for my Poly mids and a PPI Art Series A200 for my soon to be installed Vifa tweets from Ascendant and whatever 3 way xover I get. Running stock alt with 1/0awg and a D31 in the back with stock batt....... Stock electrical is of the strongest I've seen.
My stuff's in my sig. I'm running off of stock battery and alternator, and will until they take a dump. No issues so far.

 
I've been looking at picking up a 2002-now 4-door Explorers for a daily driver, because my WJ is going to be growing up soon.

How much space do they have in the cargo area? Any pictures of any body's set-ups?

 
SO what's everyone got in their explorers? I have 4 hAvoc 15's in 12.5 cubes net to 31.25hz all with 1.5" thick walls. They're powered from an Autotek MX3000.1 at 4 ohms which is approximately 2400 watts, but the power is going to be upgraded soon.... I'd love to get a second mx3000.1. I have a kenwood 6.5 double din headunit with touch screen navi ect...... An orion 275SX for my Poly mids and a PPI Art Series A200 for my soon to be installed Vifa tweets from Ascendant and whatever 3 way xover I get. Running stock alt with 1/0awg and a D31 in the back with stock batt....... Stock electrical is of the strongest I've seen.
Right now Im just working on my front stage but I think im gonna go with

2 15" Audioque HD3

1 IA 20.1

250 amp alt

undecided on batts and a bunch of 1/0

 
I'm pulling together stuff for mine atm as well

So far only have sub amps and components picked out

2 Hifonics colossus II

focal k2p components and 6x9s

kinda waiting a bit to see how some subs pan out before deciding on them.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yep, that will mark the third iteration of teh X series. i figured that was in the loop as they have been running out of stock on the last...
11
998
Ahhh, I had it in my head that it was 1 ohm stable for some reason.
41
3K
One fuse (the 300) goes close to the battery to protect the power wire...then close to the amp you'll add another fuse (whatever size the...
29
4K
It is in eBay. It is a bit more complicated. You clip off the gray blocks on your radio's harness and splice in the new harness by color matching...
7
1K
There is one more thing; you said you will be using the OEM amplifier for the front stage. If that is the case, then you may need an vehicle...
5
174

About this thread

Phreaker

10+ year member
Senior VIP Member
Thread starter
Phreaker
Joined
Location
Tampa,fl
Start date
Participants
Who Replied
Replies
28
Views
1,334
Last reply date
Last reply from
denim
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0
Screenshot 2024-05-31 182324.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top