Hi all i have a golf mk7 2014 that has the dynaudio system installed, im after fitting my jl audio sub and amp. Im after some help on what lineout converter id need to purchase for this to be possible? Im told the normal line out wont work as the dynaudio is pre amped? im new to all this so any help will be appreciated
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
If the amp is already part of the unit, with the amp built in, you would need a power supply, something like this:
Or sell that amp amp and...
- Started by frozen
- General Car Audio
So you have your main power wire which feed the current it needs. Your original HU would have had it, and you probably connected your new HU to...
- Started by mraynsford
- Head Units
That might depend on the head unit. Some can use a 5 amp fuse, some a 10amp, some a 15amp fuse (if / depending on how much it's powering the...
- Started by GizzmanSL2
- Wiring, Electrical & Installation
Lmao it definitely could have. Im in construction so i have some aptitude of building and fixing ****. If i was just a regular joe i would have...
- Started by Mindgame516
- Enclosure Design & Construction
Thanks for all the advice. Ultimately, I was able to get them to honor the warranty contract. It took a lot of back and forth and I received...
- Started by Chris Morton
- Wiring, Electrical & Installation
About this thread
Latest topics
-
-
-
-
Jeep center console sub install issues.
- Started by vlusardi
- Replies: 1
-
