FInally getting around to showing a build (PICS)

[mendon mafia 10+ year member]

I would also use different screws and bolts when fastening the Atomic amp so nobody can get it out easy if someone decides to break in.

good call. Only thing is, the way the mounting feet are you only need to remove 2 screws and the other 2 the amp will just slide out from //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif.

Its only screwed into the fiber board its mounted on. the screws dont go all the way into the metal.

there is really no good way to mount it unless i drill through the fiber board and deck and bolt it through but that will be a pain. Probably what in going to do though eventually.

 

[its_bacon12 10+ year member]

I would definitely secure it as best as possible, that thing mounted there is like putting a target on your car.

 

[LoggedOut 10+ year member]

test //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[mendon mafia 10+ year member]

test //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

lol. theres my cd's all in one.

 

[hott-nix 10+ year member]

may want to put some grommets on those holes that the speaker wires pass through beside the crossovers.

 

[mendon mafia 10+ year member]

may want to put some grommets on those holes that the speaker wires pass through beside the crossovers.

good call. i think im just going to tape around the wires theres not much movement and none of that will be visible once im finished.

 

[DB-Audio 10+ year member]

looks good dude

 

[mendon mafia 10+ year member]

looks good dude

thanks! more pics to come tonight. finishing my cuts and stating assembly on the boxes.

 

[Engine_hp 10+ year member]

good job, nice big 3 bro

 

[RKPsk8er 10+ year member]

looks nice!

 

[mendon mafia 10+ year member]

got the rest of the wood cut today

thats all the panels for both boxes

Had a friend help me out.

 

[nickolas_j_t 10+ year member]

looks great

 

[mendon mafia 10+ year member]

This is one of two boxes. It went smoothly except for a few mishaps. i was rushing because i was having a friend help me and it was getting late.

gorilla glued all joints. counter sunk and predrilled all holes for screws. i may still caulk it anyways.

I think im gonna add bracing between the port wall and the side as well as top to bottom.

I forgot to add a 4 inch radius in the corner too so i need to figure out how to do that now. i have some ideas though, shouldnt be too bad to fix.

 

[sparkplug121988 10+ year member]

What kind of glue did you use for the headliner?

 

[SELFMADE]

How big is each box?