final poll (really)

[dustinr 10+ year member]

^^
does anyone know if the Rs will be able to handle 750wrms a piece daily ported?

Yeah.. They will probally handle around 900 daily.. ported. I'd stick with 750 though.. just to be on the safeside.. I'm running around that to mine ATM.. and it sounds great.

 

[fosgate140 10+ year member]

pbx will slaughter all of those if you do the install corectly. i have 2 extremes in 3 cubes a piece slot ported with 1600 rms to each woofer in a 3rd gen eclipse and i hit a 151 flat on a termlab and im ported low at 35 hrz.pbx gets my vote.

 

[Looney_Tune 10+ year member]

pbx will slaughter all of those if you do the install corectly. i have 2 extremes in 3 cubes a piece slot ported with 1600 rms to each woofer in a 3rd gen eclipse and i hit a 151 flat on a termlab and im ported low at 35 hrz.pbx gets my vote.

well im thinkin 2 cubes apiece tuned to 30hz with 1500wrms...........with this said would the PBX be somthing i should look into or go with the Rs?

 

[Looney_Tune 10+ year member]

16 more votes

 

[Looney_Tune 10+ year member]

ok, probably gion with the Pionner since everybody and their mom has the R, from wat i heard about the pioneer i should be pleased. I will be powering them with a cadence Z7000 tuned to 30hz with around 4 cubes total. This should be louder than my previous setup which was 2 15in. CVRS sealed off a BX1000D correct?

 

[Looney_Tune 10+ year member]

^^^^^

 

[Looney_Tune 10+ year member]

ok, probably gion with the Pionner since everybody and their mom has the R, from wat i heard about the pioneer i should be pleased. I will be powering them with a cadence Z7000 tuned to 30hz with around 4 cubes total. This should be louder than my previous setup which was 2 15in. CVRS sealed off a BX1000D correct?

^^^^

 

[delvryboy 5,000+ posts]

as far as spl, the PBX's i havfe witnessed sucked.... hell, one guy from here swaped one for his brahma and lost over 2db.

i would vote alpine/pioneer

 

[luvofmusic 10+ year member]

my vote is for pbx, I have 2 15's dual 2ohm on 2 1200d's and they definately need more power. The voice coils was not true 2ohms,I measure with dmm and got 2.6.

 

[Looney_Tune 10+ year member]

well all who recommended the PBXs have alot of power going to them. Is it safe to say that the 2 premieres will be louder than my previous system.

 

[soundstreamer 10+ year member]

heh. you're going onto a full month on this poll and still haven't bought? go get the pbxs man!

i saw a 12" pbx in a custom box register a few dbs higher than a 15" mtx 9500 in an mtx box. both on the same ~600watt amp, then the same ~1000watt amp. you don't really need a lot of power to get them playing.

 

[btnhfan 5,000+ posts]

PBX

I love those subs.