fiberglass mold help!

[TrlcKed_OuT 10+ year member]

im molding the bottom of my extra cab f150 and i have put 2 layers or matt on and its still no where near where i need it..should i use a layer of fleece to really thicken it up ..mainly the edges are not getting very strong....

Click to read more...

 

[azbass 5,000+ posts]

use more fiberglass about the edges. and scraps of wood on the bottom part, glass over them

 

[TrlcKed_OuT 10+ year member]

so just use some wood and scratch the fleece!?

 

[azbass 5,000+ posts]

yeah use soem wood. save the fleece

 

[bjfish11 5,000+ posts]

dont use the fleece, the mat will probably soak more resin and be stronger anyways.

 

[TrlcKed_OuT 10+ year member]

ok well ill do wood im just tryin to save some money cus i would need lik 15 layers of matt for the mold to be nice and strong...its only for 4 sealed ed 9''s so ill use some wood and see how it goes from there..

 

[jsntarrant 10+ year member]

no fleece...mar glass will strenghthen it up too

 

[nVRuckus 5,000+ posts]

What I would do if your going thick is 3 layers of mat, 1 layer of trunk liner, 3 layers of mat //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif strong enough to stand on //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[TrlcKed_OuT 10+ year member]

what and where can i get "trunk liner"..