Fiberglass box ?

[spljim 10+ year member]

will this work with the magnet so close the the sides of the box the back of the box is about 7" wide the sub in the pic is a OZ audio Me 10.2 but it is a big paper wate now I am thinking of the Sundown Audio SA-10 I think they are about the same size the black line is the out line of the box and ther is about 2" from the pole vent to the back of the box with the oz if the sa-10 wont work in this smal of a box what will be a good choce

Click to read more...

 

[i2ain2thunder 10+ year member]

Moar space

 

[fasfocus00 5,000+ posts]

i think a ported SA-8 would work with that fine but probably not an SA-10. 2" from the back wall to the pole vent is fine.

 

[spljim 10+ year member]

the sa-8 is onely about an inch shorter then the me.10 in the pic and it has almost the same magnet diameter as will and the sa-10 well be seald

 

[spljim 10+ year member]

what about the Polk mm 10"

 

[kgcolbyIII 10+ year member]

Alpines love smaller enclosures that might be something. To check into.

Here is a tip I learned doing construction and fiberglass clean up. When you shower use cold water and wipe down only. Hot water will open them pores making it. Worse