Fi Q 15"

[dvrmstrng 5,000+ posts]

what do you mean do you use

 

[Qbenjamin 10+ year member]

I refuse to pay someone to do something for me when I can find out how to do it myself. All I need to know is what size the port SHOULD be, other than that, I can figure it out myself.

 

[Naledge503 10+ year member]

Scott recommended to me to use 12-16 sqin of

port per cuft of enclosure.

 

[phyphoestilic 5,000+ posts]

wow u're f*cken retarded, we can't tell u what size the port is unless u tell us what size box ur putting it into and what u plan on tuning it to.

 

[slikrider20 10+ year member]

what do you mean do you use

Oops, i meant LOSE.

 

[slikrider20 10+ year member]

Scott recommended to me to use 12-16 sqin ofport per cuft of enclosure.

yeah thats about right, my box is like 3.3cf so if you took 3.3X16 then you get 52.8, and i have 53 so i know i'm about right.

NDMstang is viewing this thread, i'm sure he could tell you.

 

[Qbenjamin 10+ year member]

Your an idiot hypo. Obviously I am sticking with something in the range of what the manufacturer is recommending. You are the only one that didn't recognize that. Didn't you get the memo? Idiot.

 

[NDMstang65 10+ year member]

Scott recommended to me to use 12-16 sqin ofport per cuft of enclosure.

yeap.

 

[Qbenjamin 10+ year member]

I don't need or want any help from you, if you feel the need to be an a$$hole.

 

[phyphoestilic 5,000+ posts]

Your an idiot hypo. Obviously I am sticking with something in the range of what the manufacturer is recommending. You are the only one that didn't recognize that. Didn't you get the memo? Idiot.

HAhahahahahahaha freaking retarded, The manufacturer spec is a huge range. U are so stupid, put ur man avatar back up and go cry in a corner.

Ported box: 2.8-4 cuft @ 28-33Hz

 

[Qbenjamin 10+ year member]

Thanx, I appreciate that. Anything else?

 

[bimma85 5,000+ posts]

I refuse to pay someone to do something for me when I can find out how to do it myself. All I need to know is what size the port SHOULD be, other than that, I can figure it out myself.

Be a cheap *** then //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif. I hope you know the best layout and dimension for your car and tastes. Also hope you're good at math.

http://mobile.jlaudio.com/support_pages.php?page_id=165

have at it buddy

 

[Qbenjamin 10+ year member]

What does it have to do with being a cheap ***? You learn from experience, not just by asking someone to do it for you all the time.

 

[Qbenjamin 10+ year member]

And actually I am really good with Math.

 

[Qbenjamin 10+ year member]

OKAY Bimma, say I want to do a vented box at about 3CF with a tuning FRE at about 31 hz........Are you trying to tell me that I wouldn't be able to figure that out what the port size would be even if I asked questions?