Fi BL enclosure design

[KHARPS 10+ year member]

I'm going to be putting together a new box this weekend for a 10'' BL in my reg cab ranger. First off, the box will be 1.6@36-37 with (2) 3'' aeroports (Fi recommends 1.25). Will I run into any problems with having the box larger than optimal size? How should I put my ports?

Here's the space I'm working with:

Option 1:

Option 2:

Option 3:

Click to read more...

 

[mlstrass 5,000+ posts]

Usually going bigger brings out the lows better and decreases handling power....

You could try it at 1.6 and if needed take up some volume in the box with 2x4's.

 

[mlstrass 5,000+ posts]

you going to finish it Saturday and come to the meet on Sunday?

 

[KHARPS 10+ year member]

you going to finish it Saturday and come to the meet on Sunday?

Yeah, I'll try and stop by on my way back to school Sunday. What time?

I have a lot of work ahead of me.....I need to figure out why my components keep blowing and get this box together still.

 

[KHARPS 10+ year member]

anybody have opinions on the port location?

 

[mlstrass 5,000+ posts]

show is from around 9am to 5pm...

 

[KHARPS 10+ year member]

ttt

 

[KHARPS 10+ year member]

or would either above option be basically the same?

 

[KHARPS 10+ year member]

lil help

 

[KHARPS 10+ year member]

up

 

[KHARPS 10+ year member]

ttt

 

[KHARPS 10+ year member]

anyone care to help me out?

 

[KHARPS 10+ year member]

???

 

[KHARPS 10+ year member]

I'm starting on this tonight.....anybody care to tell me if there's a difference in the position of the ports?

 

[boomzilla 10+ year member]

more than likely the ports on your side will be the loudest, but its something your gonna have to just go with and see how it sounds. there is no deffinate answer unless you try it out