Few SSA DCON 10" questions

[Heeltoeclutch 10+ year member]

I'm trying to enter the DCON into Winisd, but I don't have Z and Le... Are there suggested numbers for these parameters somewhere?

And for Diam., should I say 10 in. (converted), or the cutout diam, or vat?

Tanks //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Bassin Buick]

Z is the actual ohms it's rated at. so 4 or 2. and LE isn't necessary.

 

---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------

 

diameter is the cone diameter , not the actual size of the sub

 

[Heeltoeclutch 10+ year member]

Z is the actual ohms it's rated at. so 4 or 2. and LE isn't necessary. 

---------- Post added at 02:43 PM ---------- Previous post was at 02:42 PM ----------

 

diameter is the cone diameter , not the actual size of the sub

I thought that was Re? what should go in Re then?

And... I suppose I'll estimate the cone diam... Unless I can find it somewhere else //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[Bassin Buick]

re is the dc resistance of the coil. gimme a sec and i will look it up

 

[Heeltoeclutch 10+ year member]

Thank you kind sir //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Bassin Buick]

3.9 or 1.95 for the D4 model

 

---------- Post added at 02:51 PM ---------- Previous post was at 02:50 PM ----------

 

says 7.8 on the website so that is obviously when wired in series. so my figures should be fine.

 

[Heeltoeclutch 10+ year member]

so... 3.9 for the SVC I would assume?

Thanks man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Bassin Buick]

so... 3.9 for the SVC I would assume?
Thanks man //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

correct , no problem bro.

 

[denim 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[T.I.K. 10+ year member]

Just throwing it out there, but the AQ SDC2.00 comes in an 8" version, if you're worried about weight, and its rated at 500w, butall the other AQ woofers are way under rated, lots of people run 2x rated watts to the HDC subs, so I imagine those little 2.0' s would take some abuse too

 

[Buck 5,000+ posts]

Talk to Bumpin' Goalie, he has 2 of them in his vehicle. I've heard them, they sound great.

 

[T.I.K. 10+ year member]

The 2.0s are marginally cheaper as well...

Either sub will leave you satisfied.

Also, are you gonna mount it in your rear deck like you had talked about? Cuz i'd love to design the box, if you'd let me give it a shot

 

[denim 5,000+ posts]

Somethings cost more for a reason. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[T.I.K. 10+ year member]

Somethings cost more for a reason. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

I think I'm gonna compare a DCON to a SDC2.0 for fun, once I get the appropriate funds.

I think it would be interesting to see which is louder and cleaner.

 

[Kangaroux 5,000+ posts]

I think I'm gonna compare a DCON to a SDC2.0 for fun, once I get the appropriate funds.
I think it would be interesting to see which is louder and cleaner.

i think the SD2.5 would be a better comparison considering motor size and what not