Few SSA DCON 10" questions

[09civic 5,000+ posts]

More then reasonable. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Haha i knew you would chime in sooner or later

 

[T.I.K. 10+ year member]

Where did the real klash go?!?

He's tiedup to the oak tree out back, listening to the song "rehab" on repeat for about the last 12 hours

 

[09civic 5,000+ posts]

He's tiedup to the oak tree out back, listening to the song "rehab" on repeat for about the last 12 hours

Poor guy...oh well

 

[Heeltoeclutch 10+ year member]

Sooo I forgot that I hadn't received my last paycheck from work term... I checked my online banking just now and found it had been transferred to my account. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I think I'm going to order the DCON shortly.

 

[09civic 5,000+ posts]

Sooo I forgot that I hadn't received my last paycheck from work term... I checked my online banking just now and found it had been transferred to my account. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif I think I'm going to order the DCON shortly.

Good to hear //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Were you just getting one or two? What size?

 

[Heeltoeclutch 10+ year member]

One. I can't afford the weight or airspace of two //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Now I have box questions guys. I've cut the wood for a 1 cube wedge box that will butt up nicely (hopefuly) against my rear seats. SSA recommends a tuning of 28-33 Hz, and after being so disappointed by the inability of my sealed-ness to do anything below high 30s, I was thinking of tuning to 29 or 30. I met Klash though yesterday at a school thing, and he was saying how 32 Hz will dig into 20s just fine... Thoughts?

I will be using an aeroport, as they are lighter. I also don't know what diameter tube to use... I can enter 2" or 4" or whatever into calculators and it'll give me lengths that work for each... what diameter is best for this application?

edit: started a more relevant thread. thanks for all your help everyone //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif