Attached are some screenshots of the design I came up with for my oddly shaped trunk. I appreciate any feedback!
I’ll be running a single SA12 v.2 D2 on a Kicker CXA1200.1@1 ohm.
The only things I wasn’t sure about are the exact driver displacement for that model (I used 0.14, which is listed as the displacement of the v1); and whether to tune to 35 hz (listed in that sub’s box recommended specs) or 32.75 hz (the specific enclosure design for that driver on their site).
I’ll be running a single SA12 v.2 D2 on a Kicker CXA1200.1@1 ohm.
The only things I wasn’t sure about are the exact driver displacement for that model (I used 0.14, which is listed as the displacement of the v1); and whether to tune to 35 hz (listed in that sub’s box recommended specs) or 32.75 hz (the specific enclosure design for that driver on their site).
Attachments
Last edited: