Feasible box?

Zerstorer
10+ year member

Senior VIP Member
As a future setup, I'm going to have multiple RE8s. I'd like to be able to switch from an SQ/SPL function.

Here is my theory: Create a box with a tuned port (.5 cubes and 35hz) that can be switched to a sealed box (.217 cubes) with a large MDF plug? I'm thinking a slot port, so I can simply slide in a piece of wood (with weatherstripping on the edges) and tie it down with wingnuts or some other quick fastener.

Attached is a crappy sketch of what I'm thinking.

15356plug.jpg


 
I think with the proper reinforcement, weather stripping, and some strong metal hardware to hold in place, it would be sealable.

The point of this thing would be to have an SPL AND SQ setup. Maximum use out of a single box, hopefully.

EDIT:

How low can the RE8s go? is 20hz too much to hope for? 30hz?

 
I think with the proper reinforcement, weather stripping, and some strong metal hardware to hold in place, it would be sealable.
The point of this thing would be to have an SPL AND SQ setup. Maximum use out of a single box, hopefully.

EDIT:

How low can the RE8s go? is 20hz too much to hope for? 30hz?
Not if you tune at 35hz //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Also depends on how many you have because the more subs, the more surface area, the lower they can get with authority. I mean sealed, they will make noise at 25hz, but if you only have one, it wont be earthshaking / flat //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
Not if you tune at 35hz //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Also depends on how many you have because the more subs, the more surface area, the lower they can get with authority. I mean sealed, they will make noise at 25hz, but if you only have one, it wont be earthshaking / flat //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

How about 4 RE 8s?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Zerstorer

10+ year member
Senior VIP Member
Thread starter
Zerstorer
Joined
Location
Tucson, AZ
Start date
Participants
Who Replied
Replies
6
Views
592
Last reply date
Last reply from
Zerstorer
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top