Fatmat, Edead, B-Quiet

[bonesninja 5,000+ posts]

Anyone using this stuff? I can about 100sq ft of this stuff, any of them, for around a bill. Let me know if you are using any of these any how do you like them. Especially let me know on its sticking ability.

Click to read more...

 

[Hayabusa 10+ year member]

Raamat BXT ftw... Fatmat and B-Quiet are known to be garbage peel and seal style. Edead has a bad reputation too. There newest stuff might be decent though. U'd have to do a little re-search to find out... Its the best of those "big" 3 u listed though.

 

[bonesninja 5,000+ posts]

anyone else?

 

[SSS 18734 5,000+ posts]

fatmat sticks quite well. I havn't even come close to having a problem with it peeling off. But fatmat doesn't work nearly as well as Raammat.

 

[Mr. Loki 5,000+ posts]

I am using edead v3 and I would say go that route, the e dead v1 that I had sucked, the v3 is liquid and very thick It worked alot better for me although its hard to paint it on you would need 3 coats minimum, but overall the work is worth it and the gallon of v3 cost roughly 64$ shipped and I did my crown vic trunk 3 times with 1/4 can to spare.

 

[Towncar 10+ year member]

Raamat BXT ftw... Fatmat and B-Quiet are known to be garbage peel and seal style. Edead has a bad reputation too. There newest stuff might be decent though. U'd have to do a little re-search to find out... Its the best of those "big" 3 u listed though.

I use the be quiet ultimate, and it does very nicely. As i believe it was pretty much dead even with raamat on the sound deadner showdown. Took out tons of rattles for me, and it can stand very high temperatures. Prices are very cheap on it aswell. Now the bquiet extreme is the cheap stuff.

 

[FoxPro5 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/search.gif.e79a63b2b580b39b282dff402646b704.gif//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif

Holy shit this is discussed every day it seems.

Edead is crap. RAAmat is the best overall value. /story

www.sounddeadenershowdown.com

 

[bonesninja 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/search.gif.e79a63b2b580b39b282dff402646b704.gif//content.invisioncic.com/y282845/emoticons/furious.gif.fc81ca146dbff91fede3ed290dbc4f4c.gif
Holy shit this is discussed every day it seems.

Edead is crap. RAAmat is the best overall value. /story

www.sounddeadenershowdown.com

good for you........unless you have actually used these products yourself, please refrain from shitting on my thread. I asked a very simple question, i'm sorry (meaning not sorry) that you had to get your panties in a bunch.

 

[slick rick 10+ year member]

you get what you pay for...

 

[jujumantb 10+ year member]

I've never had a problem with edead v1 or v2, and in minnesota we have the extremes of the temperature scale.

 

[krouchchocolate 10+ year member]

how about hushmat?

 

[XaznKewLguyX 10+ year member]

I've never had a problem with edead v1 either in socal weather. Its been sticking for 5 years.

 

[Hebrew Hammer 10+ year member]

I've used many a product in many of installs over the years...an I'm totally impressed with RAAMAT and would recomend it to anybody without hesitation

 

[anvil82]

I used a roll of raamat bxt on my two doors, works very well.

Works even better when heated slightly.

I had to heat it though since I applied when it was about 40-50 F.

 

[bryantxii 10+ year member]

i got a email from ed for the edead v1 that gives you 60 cents per squar foot. i dont really feel like getting the link right now unless you really want it then pm your email and ill forward it to you