Got everything mounted and buttoned up. Time to put some of the interior back in.
RCAs, remote and driver side speaker wire zip tied and tucked in. I ran the speaker wire up under the dash and over to avoid running it with the power wires.
Front seat all the way back. This will probably never happen again as not many people taller than me have/will drive my car.
Seat in driving position.
The most you can see from the side. You have to be looking for the amp to notice it. Anyone just walking around the car will not have the right angle.
Seat all the way forward rear view. I'm almost positive this has never happened and pretty sure it won't ever happen again. No way anyone would be able to drive the car with the seat all the way forward.
Seat in driving position rear view. Hidden nicely and I don't think feet will be able to reach it.
Passenger side normal position.
These are noticeable. The amp was easily seen on the passenger side so I moved it over some. These RCA cables stand out, going to use cable wrap to hide them better. The passenger seat has different spacing than the drivers for some reason.
Plenty of room around the amp for ventilation. I left one of the side covers off so I can mess with the filters and gain. I will be able to put it on and get it screwed in using a shorty screwdriver without removing the seat.