Enough space for 2 12s?

[Papermaker85 5,000+ posts]

Did the op get this? It's a little hard to read on my 1360 x 768 resolution... looks like 4.4ft3 net 72.5 in2 x 21" long tuned to 34hz... with cut sheet also included... nice, I hope he can make out the details... and it IS for his driver... not a cookie cutter box like the link...

its models up pretty decent. those lil drivers can be tricy to get right but they are decent drivers for the money(when you get them cheap at least)

the QES is middle road QMS is low suggesting a good deal of mechanical resistance so Id stick to around 2.2 to 2.4 per woofer depending how peaky you want it at tuning.. the Qms should come up to around 4.2 or so after break in dropping fs to 29 to 30 so you will get plenty of extension. it you want something bit stronger on hte top end cut it down to 4 cubes same tune slightly less port area..

ill post up some frequency response graphs..

 

[shredder1 10+ year member]

its models up pretty decent. those lil drivers can be tricy to get right but they are decent drivers for the money(when you get them cheap at least)
the QES is middle road QMS is low suggesting a good deal of mechanical resistance so Id stick to around 2.2 to 2.4 per woofer depending how peaky you want it at tuning.. the Qms should come up to around 4.2 or so after break in dropping fs to 29 to 30 so you will get plenty of extension. it you want something bit stronger on hte top end cut it down to 4 cubes same tune slightly less port area..

ill post up some frequency response graphs..

Does this box have a single or double baffle?.. My screen resolution is limited and the screenshot is hard to make out... Baffles,cut sheet... etc. OP might have issues reading it.

 

[Papermaker85 5,000+ posts]

 

[Papermaker85 5,000+ posts]

Does this box have a single or double baffle?.. My screen resolution is limited and the screenshot is hard to make out... Baffles,cut sheet... etc. OP might have issues reading it.

double. even though the way it should be designed it should need it but if the OP doesn't have great wood working skills the double baffle will be better than a poorly braced signal baffle..

 

---------- Post added at 12:34 AM ---------- Previous post was at 12:33 AM ----------

 

Ihold ctrl and scroll up and i can see it fine.. if he cant see it ill re shoot it..

 

[Papermaker85 5,000+ posts]

all the curves will shift to the left two or three HZ after breakin so Id suggest the higher tuned box.. unless your play DJ slow fets no rean to tune any lower than 35 hz most music is above 40 hz..

 

[shredder1 10+ year member]

What do ya' know... ****... I did not know that will zoom the screen, I can read it now...//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[Papermaker85 5,000+ posts]

What do ya' know... ****... I did not know that will zoom the screen, I can read it now...//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

yea. its handy.. now that give you whole new life to **** huh? lol

 

[shredder1 10+ year member]

Yes... my horizons are broadening daily just tryin' to learn/relearn this... now if I could only figure out winisd... THAT's been a bear... LOL!... Thanks!

 

[Papermaker85 5,000+ posts]

Yes... my horizons are broadening daily just tryin' to learn/relearn this... now if I could only figure out winisd... THAT's been a bear... LOL!... Thanks!

what you having trouble with?

 

[shredder1 10+ year member]

At this point I'll just say I was so frustrated that I uninstalled it a week ago... Even getting started entering parameters was too much... Heck... I had a bad stroke a year ago and just relearned to use my hands and walk... my mental acuity is coming around... but patience is hard... I'm beyond help in this, but thanks for asking... I'll eventually get it!..LOL!

 

[Papermaker85 5,000+ posts]

At this point I'll just say I was so frustrated that I uninstalled it a week ago... Even getting started entering parameters was too much... Heck... I had a bad stroke a year ago and just relearned to use my hands and walk... my mental acuity is coming around... but patience is hard... I'm beyond help in this, but thanks for asking... I'll eventually get it!..LOL!

If you need help let me know.

Dad had a stroke recently. Luckly his was very mild. Hope things turn around. Dont stree to much man.

If you want ill make a video to walk you through it..

 

[shredder1 10+ year member]

If you need help let me know.Dad had a stroke recently. Luckly his was very mild. Hope things turn around. Dont stree to much man.

If you want ill make a video to walk you through it..

Thanks, it was a clot thankfully... (ribs/steak daily)... so stress was only a small factor... but I do take it easy more nowadays... when I'm ready I will look on YouTube... I'm sure there is a video already there I just have not looked!.. LOL!.. Hopefully the OP got his specs OK already...

 

[Boomin_tahoe 5,000+ posts]

Not trying to be an azz, but why would someone buy subs and then ask if they had enough space? What if you didnt? If you have an Explorer then yes you do.

Heh, good valid question. Kinda like someone buys an amp and asks how to hook it up/install it. Haven't been surprised on the amount of questions on here that get asked.

 

[audiobaun 5,000+ posts]

Id do 5cubes and try to tune to 32 htz myself..Great subs..Take a beating and actually sound really nice..Id be looking into getting some deadening and bracing done..On that roof.Those subs can beat the hell out of a vehicle with some power