Enclosure design for teamsolo

[Tempe 10+ year member]

9.0 cubes tuned to 32 hz

I hope that works out for you! Make sure you brace that very well!!!

T

Click to read more...

 

[Tempe 10+ year member]

Also with a 32hz tuning I assumed this was for daily driving. If SPL is your main priority (doubt that) then flip the box around with port on driver's side.

T

 

[mobeious 10+ year member]

that ports looks way off... needs to be more square

 

[lilmaniac2 5,000+ posts]

what you talking about willis?

 

[mobeious 10+ year member]

3.5x29 just seems like it would generate some port noise but i could be wrong build it and see

 

[Tempe 10+ year member]

30.5 x 3.5 is a 8.71 to 1 ratio. I've always followed this rule:

The ratio of W to h should not be any more than 9 to 1 to prevent tuning shifts introduced by excessive friction between the rapidly moving air and the port's surface. It should be noted that this is not a hard-and-fast rule, merely a rule of thumb to help you prevent a mis-tuning.
In short, keep the port as square as aesthetically and physically possible.

I could always make it two chambers.

T