Enclosure Build: Scapelli21 Dual 12's

[Pioneer~Saturn 5,000+ posts]

Alright, this enclosure will be for Scapelli's pair of 12's which will most likely be Nightshades iirc.

Specs come to:

-4.3 cubes net

-6" aero port

-30hz tuning //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Got a bit done tonight, pieces cut and edges of the side panels rabbeted for ease of carpeting later..

Back on..

Side on..

More as it happens

Click to read more...

 

[GetLikeMe 10+ year member]

You switching over from .5 insets to rabbiting? nice start

 

[tez4life Premium Member]

Sounds good //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Single 6" areo going to be enought port area? Not like I know myself, lol, just curious.

 

[Pioneer~Saturn 5,000+ posts]

You switching over from .5 insets to rabbiting? nice start

I switch it up every now and then, in the beginning with this design though I couldnt afford an inset on the sides so I planned on a rabbet from the start and stuck with it.

Sounds good //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
Single 6" areo going to be enought port area? Not like I know myself, lol, just curious.

It's a hair under the 7 sq inches of port per cube ruling but it should be just fine imo //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[406er 10+ year member]

I switch it up every now and then, in the beginning with this design though I couldnt afford an inset on the sides so I planned on a rabbet from the start and stuck with it.


It's a hair under the 7 sq inches of port per cube ruling but it should be just fine imo //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

you recess the sides a whole half, i usta do just a 1/8 but i would fight with it every now i then so i just rock the 1/4, im curious how the rabbited edge is gonna work for carpiting!

 

[Pioneer~Saturn 5,000+ posts]

you recess the sides a whole half, i usta do just a 1/8 but i would fight with it every now i then so i just rock the 1/4, im curious how the rabbited edge is gonna work for carpiting!

Yea, I go with a .5" recessed area just so it is something to grab onto as well if space allows. And the rabbeted sides are pretty easy and clean for carpeting, joo'l see //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Pioneer~Saturn 5,000+ posts]

More tomorrow

 

[FLYONWALL9@AOL. 10+ year member]

PS,

I have a question about an enclosure that isn't related

to this. Would you rather a PM or Email to ask the question?

I don't want to derail your thread.

Thanks

 

[Pioneer~Saturn 5,000+ posts]

lol, its cool. pm would be fine

 

[DonH 5,000+ posts]

lookn good. how much a foot do u get 6" abs? i found a place that has 8" abs for 6.35 per foot //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Pioneer~Saturn 5,000+ posts]

Thanks, and i dont really buy it too often...just aero's when i make enclosures like these //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[Pioneer~Saturn 5,000+ posts]

Mo' picz..

 

[Pioneer~Saturn 5,000+ posts]

Resin..

Just need to clean it up a bit and get it carpeted and then the exterior pieces of the port will go in..more tomorrow night

 

[Ray21 10+ year member]

**** good work!

 

[tez4life Premium Member]

Beautiful //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif