eLa's box log. pix

[James Bang 5,000+ posts]

for a 12" xxx

2.5 cubes 32hz

here we go:

some things to be used, or not

pieces cutting the pieces

Click to read more...

 

[James Bang 5,000+ posts]

just stacking to see if they fit.

and they do! kinda

now off to put the pieces together.

first i measure and predrill the holes for the nails.

my special thingamajig to make the nails flushed, the bigger looking holes were resulted from the thingamajig

walls of port: rounded for better air flow

 

[JL12W7INAGS300 10+ year member]

NIccce, you probably won't need that wood glue //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif

 

[James Bang 5,000+ posts]

another rounded edge

gorilla glue expanding.... such a mess.. drives me nutts having to wipe every 5 mins:crazy:

b4 paint job

after.

 

[James Bang 5,000+ posts]

baking in the sun for at least 2 hours = sun burn = ^^^ all that done //content.invisioncic.com/y282845/emoticons/smokin.gif.f1dc8d2acb1809e863ebd6a47eaa0d45.gif

 

[ssj2xxgotenxx 10+ year member]

Nice work... I'm going to build an identical box during my spring break, and what do you know? It's going into a 93 camry as well =P . I'd like to know dimensions of the pieces of wood so I can copy you =D I think I'm going to tune it a little lower though, around 28 hz.

P.S. love the lighting source for the last pic

 

[James Bang 5,000+ posts]

Nice work... I'm going to build an identical box during my spring break, and what do you know? It's going into a 93 camry as well =P . I'd like to know dimensions of the pieces of wood so I can copy you =D I think I'm going to tune it a little lower though, around 28 hz.
P.S. love the lighting source for the last pic

lol. the outside light is busted:crap: it got dark and i had to improvise.

my vehicle is a 96' btw, and i wish it was going into my trunk along w/ a XXX:yumyum:

 

[James Bang 5,000+ posts]

paint job continued

45s for them corners... gotta protect my hoes ya know //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[eLa]

thats sh!t is looking amazing.....//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[James Bang 5,000+ posts]

done and done:

bi-amp speaker terminal: allow for VC wiring from outside the box. lucky bastard.

 

[ssj2xxgotenxx 10+ year member]

Carpet FTW

 

[lslugz 10+ year member]

Looks really good, x2 on the carpet.

 

[James Bang 5,000+ posts]

Looks really good, x2 on the carpet.

thanks. I did not carpet this box because (1) it wasn't part of the deal adn (2) I've never done a carpet job. I've only carpeted an amp rack b4 and I didn't like it all that much.

Also the bare wood look grew on me. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[maldecido33 10+ year member]

where'd you buy that terminal?

 

[JL12W7INAGS300 10+ year member]

I've always wanted to try to do those 45 peices between the wood, but does it really do anything? good looking box anyway