Double din install help

[Cbach1987 10+ year member]

I installed a pioneer AVIC-x390bt in an 07 civic ex and it all went ok and sounded great. But this morning the front driver side speaker wont work!

Any ideas or help would b awesome

Click to read more...

 

[Louisiana_CRX 5,000+ posts]

most likely a bad connection the factory speakers can take the power of the deck with their neo motor structure...id double check the white and white w/black stripe wire connection behind the deck

 

[Cbach1987 10+ year member]

Awesome ill give that a shot after work and see if that fixs it. Thank you!

 

[Louisiana_CRX 5,000+ posts]

Awesome ill give that a shot after work and see if that fixs it. Thank you!

yw....let me know

 

[maylar 10+ year member]

Could also be the speaker connections inside the door.

 

[Cbach1987 10+ year member]

I tried those wires and checked the rest while I was back there and couldnt see any loose wires. I tried pulling on them to make sure they were all attached and everything checks out. I dont think its the speaker itself cuz I didnt touch them at all. Anyother ideas? It worked after it was first installed and then the next day it stopped working and only 3 work now

 

[Louisiana_CRX 5,000+ posts]

I tried those wires and checked the rest while I was back there and couldnt see any loose wires. I tried pulling on them to make sure they were all attached and everything checks out. I dont think its the speaker itself cuz I didnt touch them at all. Anyother ideas? It worked after it was first installed and then the next day it stopped working and only 3 work now

another test you can perform to test the speaker is to disconnect the two whit speaker wires and take a AA or AAA battery...found in most TV remote controls......then on the 2 white wires going to your door speaker not the radio touch one to each end of the battery...it doesn't matter which end...listen to see if the door speaker makes a scratchy sound...if so the speaker and wire are good...the tweeter at the corner of the dash won't make hardly any noise at all due to an inline capacitor 6db crossover that will filter the sound generated by the battery

 

[Cbach1987 10+ year member]

I have the end crimped and on male and female ends and I dont think the actaul connections would b able to touch the battery.

 

[Cbach1987 10+ year member]

Bump for any help