Do I need to...

[eskimochaos 10+ year member]

unplug the negative battery terminal if Im replacing an amp?

Can I just un-hook the power wires and wrap them in electrical tape?

Is there a correct order if to disconnect the wires positive/negative first?

Thanks!

Click to read more...

 

[jco1385 5,000+ posts]

unhook the battery terminal or you'll fck up. either will do but neg is best. no order

 

[hemi=22s 10+ year member]

u disconnect positive not ground when switching amp

 

[Kold_Killa 10+ year member]

you could just disconnect the pos and wrap it... but there is still a lot of risk in that, even if you do just blow the fuse.... why can't you just disconnect the pos at the BATTERY?

 

[jco1385 5,000+ posts]

u disconnect positive not ground when switching amp

either will do. neg is actually better

 

[eskimochaos 10+ year member]

you could just disconnect the pos and wrap it... but there is still a lot of risk in that, even if you do just blow the fuse.... why can't you just disconnect the pos at the BATTERY?

I always thought you had to disconnect the negative battery terminal...this is not something to **** with guys

 

[jco1385 5,000+ posts]

unhook the neg terminal. this is correct. and worth the time

 

[eskimochaos 10+ year member]

do I need to tape that or can i let it dangle?

 

[jco1385 5,000+ posts]

if the battery is unhooked, there's no power. no tape needed. let it hang //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[eskimochaos 10+ year member]

if the battery is unhooked, there's no power. no tape needed. let it hang //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

gracias

 

[jco1385 5,000+ posts]

por favor?

que?

wat