I will be owning a set of DLS 3-way UR36i components soon. I want to try the mid-bass w/ and w/out baffle. I have an extra set of foam 6.5" XTC baffles laying around and I'm hoping to use that as the enclosure. On the on-line manual it states that the general cF required for a 6.5" is around 10-12 litres which works out to about .4 cF. And if I calculated the xtc baffles right (6" * 6" * 3.25") (.5' * .5' * .27') to .07 cF really small lol. Unless I did the calculations wrong.
-
2Participant count
-
Participant list
W8 a minute 10+ year member
CarAudio.com Elite
Those XTC baffles ****. Put enough power to them and they flex like mad. It sounds like the leads are slapping the cone.
- Thread Starter
- #3
Well worse comes to worse I can put some deadner on it, but I'll see what happens.
Activity
No one is currently typing a reply...
Similar threads
Hello all. Used to come on these forum quite a bit. I used to compete in IASCA MECA etc. and placed 1st 2x with this setup. Anyway this is my baby...
- Started by strkrfan13
- Car Audio Classifieds
The difference in 96 to 98 db is going to net you about an 22% difference in output, all things considered equal. When it comes to 325 per channel...
- Started by Mr FaceCaser
- General Car Audio
gain set well below "Normal" and base boost is off completely
- Started by brice15s
- General Car Audio 2
Speaker to radio, rca from radio to amp for signal, amp to subwoofer
- Started by Jace14
- Wiring, Electrical & Installation
That was something I was going to try also to remove some of the gasjet from the front
- Started by Jimg
- General Car Audio
About this thread
