Directed Audio?

[Untouchable11 10+ year member]

I was looking at a Directed 2400 to push SX's?

Any one had experience with Directed?

Click to read more...

 

[alti98 10+ year member]

I havent.

But I just ordered the 1100d refurb from ikesound about 3 days ago.

 

[bonesninja 5,000+ posts]

same ppl who make viper=good amps.

 

[DBfan187 5,000+ posts]

same ppl who make viper=good amps.

Don't forget Orion.//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Basically, they're all the same.

 

[req 5,000+ posts]

and PPI..

dei = good shit. they also make some of the best car alarms out there.

i have a DEI 1100d and its solid. and i have a viper 550.6 and its so sweet. and i have a PPI PC1400 and i love it.

all i can say is good stuff.

 

[2kchevy06civic 5,000+ posts]

I have a DEI 1100D....it's awesome. For sure an awesome buy. //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[CaviHitts 10+ year member]

I have the Directed 1500D which is basically the same as the 1100D. It's running 3 compvr dual 4-ohm 12's and is wired in parallel/parallel so it's seing .67 ohms. I've had it that way for 8 months and it hasn't gone into protection yet even after running on a 6 hr road trip.

 

[bonesninja 5,000+ posts]

I have the Directed 1500D which is basically the same as the 1100D. It's running 3 compvr dual 4-ohm 12's and is wired in parallel/parallel so it's seing .67 ohms. I've had it that way for 8 months and it hasn't gone into protection yet even after running on a 6 hr road trip.

how exactly did you come up with .67 ohms--i'm confused.

 

[DrewV 10+ year member]

how exactly did you come up with .67 ohms--i'm confused.

Dual 4-ohm in parallel = inverse of (1/4 + 1/4) = 2 ohms.

Three 2-ohm speakers in parallel = inverse of (1/2 + 1/2 + 1/2) = inverse of 3/2 = 2/3 = 0.67 ohms.

 

[phsballin4life 10+ year member]

ive heard nothin but good things ive always used memphis amps tho....

 

[audiolife 5,000+ posts]

about the same quality both designed here and built over seas. not the best but definately good quality. too your ears i doubt you will think they are bad in anyway. especially in req's system with his outboard processing i doubt he could really tell between the dei's and a helix amp.

 

[bamaboy 5,000+ posts]

i have a viper 1200.1 good amp, real nice. and it glows which = extra 2 db( yea baby)

 

[Chris02NeonSXT 10+ year member]

req do you know if you can bridge channels 5 and 6 into a 2 ohm load?

 

[denim 5,000+ posts]

I am considering the 2400D for next season, but if I can find something else for less I will change

 

[req 5,000+ posts]

req do you know if you can bridge channels 5 and 6 into a 2 ohm load?

i know they are 4 ohm stable when bridged.

im going to be bridging 1&2 @ 8ohms for horn1, and 3&4 @8ohms for horn2 - squeak told me id be like 37 watts and some change. and audiolife told me 35watts would make my ears bleed. so ill be turning the gain on them channels down //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

then ill be running each koda off channels 5(koda1) and 6 (koda2) because the sub channel is on its own powersupply.

im not sure if you can bridge 5&6@2 though.. lemme check. i got the PDF right here...

[insert jeproady music]

it says that;

1&2 \\ 3&4 bridged @4 will give ya 150w x2

5&6 bridged @4 will give ya 250w x1

it says you can run 5 and 6 SEPERATLY @2ohms, but it does not say weather you can or cant bridge 5&6@2. i would say no, most PPI\DEI\ADS stuff was not able to be bridged less than 4ohms. id keep it bridged at 4 if i were you //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif