debating a change 2400RMS

[GI JOEY 10+ year member]

I am running a pair of JL w6v2 12"s downfirin sealed in my 01 silverado 2500hd ext cab. I have a JBL BPX 2200.1 to power them. Anyways I want to change things up. Get more spl and still maintain decent SQ. I raised the seat 2". I was thinking about just porting these but I kinda just want a change. So with 2400 watts what would you run without pulling the back seat out. There is plenty of room for external ports out the back firing tward the doors. I measures about 13" high in the front so I can go forward firing too.

I was thinking about 4 10"s but not sure what I can get that will hit hard and drop low but fit in this airspace.

I am looking at around internal 4.5 ft and I can do external port(s). I might be able to squeeze anoher .5 with fiberglass. PS I am not looking to empty the wallet again.

Click to read more...

 

[GI JOEY 10+ year member]

I found some brand new Eclipse sw6010 but I have yet to hear these. I had 2 TI's and they were decent but these are several series below the ti.

 

[crfrider 10+ year member]

yea ive got a silverado ex cab 2003 and i have a downfire install right now with 2 12s sealed under the seat and i want some more output so i plan on lifting the back rest up pretty high 5", lol then taking the bottom bench seat out and just building a box then using the top of the box as the seat, just adding padding on top and carpet? lol it will probally look funny but wife says i have to keep the back seat for kids so i cant just take it completely out, i plan on building it with the subs facing backwards, port backwards, i heard its louder facing backwards, but these trucks **** cause of the Floor, to many humps, so i will have to design it with the box setting foward alittle more off the back hump and the port will be in the middle of the center hump facing backwards, let me know how you go, thanks

 

[brmcm15 10+ year member]

I found some brand new Eclipse sw6010 but I have yet to hear these. I had 2 TI's and they were decent but these are several series below the ti.

yea ti's waaaaaay different than the sw6 series...

i would go for a team psi sub or AQ HDC3

whats your budget range?

 

[GI JOEY 10+ year member]

Well I am selling 4 12" w6v2's to a buddy for around 600. I was also thinking about 4 10" RE SE's. I havent heard these in person. I also thought about 4 w3v3's, 4 cvx, 4 rf t1 or p3,

I will go forward facing and external port coming off the back between the box and rear of cab facing tward the doors. There is a pertty big space there. I will do 2 seperate chapbers with a pair in each. There are plenty of subs out there, I have always had great luck with jl, Never had one burn up or blow up on me. I put 1k rms to a single VC of a w3v2 and couldnt blow it. I tried.

 

[GI JOEY 10+ year member]

Bump