deadening!!!

[gixxr13 10+ year member]

im about to deaden the entire interioir of my old ramcharger and the best deal i could find on the butyl based stuff was this E DEAD stuff on ebay. ne one worked with this stuff ? how is it? ne better suggestions?

Click to read more...

 

[XanderMoser 10+ year member]

Anything you'll ever need to know about sound deadening products (almost...)

http://www.sounddeadenershowdown.com/

 

[Stel 10+ year member]

Some of the products have changed since that comparison was done. eDead for one changed to a butyl/mylar based material from asphalt/aluminum.

 

[gixxr13 10+ year member]

thanks that link was very helpful. So the e dead should be a little better now? i think im gonna go with that unless somebody has a better suggestion. If iwerent doing such a big area id go with dynomat extreme,but its a little costly.

 

[gixxr13 10+ year member]

think 120 squar ft. is enough

 

[Mister X 10+ year member]

thanks that link was very helpful. So the e dead should be a little better now? i think im gonna go with that unless somebody has a better suggestion. If iwerent doing such a big area id go with dynomat extreme,but its a little costly.

Edead is a completely new product from the stuff that was reviewed there. I really like it, you can get it straight from the source @ http://www.edesignaudio.com

 

[gixxr13 10+ year member]

thanks man, nice link. you think i should get the v12= 45mils, or spend a little extra and go for the v1se2=60mils? oh and i like that NINe.1 mono amp and the 6000 s v.2 comp set, either ne good?

 

[Mister X 10+ year member]

thanks man, nice link. you think i should get the v12= 45mils, or spend a little extra and go for the v1se2=60mils? oh and i like that NINe.1 mono amp and the 6000 s v.2 comp set, either ne good?

I've always sprung for the se^2 in the past.

The nine.1 is a workhorse, puts out more than its rated power and can take a beating. I haven't heard the 6000v.2s but I liked the originals a lot and people have been saying that they are a big step up.

So I don't think you can go wrong with either //content.invisioncic.com/y282845/emoticons/thumbsup.gif.3287b36ca96645a13a43aff531f37f02.gif

 

[Fiercetimbo17 10+ year member]

I used edead v1.2 and while i got alot for a little it really doesnt do much. I had to do multiple layers still not as effective as the Secondskin and dynamatt extreme i used

 

[gixxr13 10+ year member]

ok i ordered 120 sq. ft. of the v1.2 for the area's like the floor, figured I could lay it down and with the factory padding and carpet over it, should be ok.Then for the more important area's (doors,etc.)I got 60 sq. ft. of the se2 stuff.

So how do you guy's think the 6000v.2's compare to say a set of cdt's in that price range? thank's again everyone's been very helpful

 

[gixxr13 10+ year member]

ok i ordered 120 sq. ft. of the v1.2 for the area's like the floor, figured I could lay it down and with the factory padding and carpet over it, should be ok.Then for the more important area's (doors,etc.)I got 60 sq. ft. of the se2 stuff.

So how do you guy's think the 6000v.2's compare to say a set of cdt's in that price range? thank's again everyone's been very helpful

 

[gixxr13 10+ year member]

//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif :thumbupw: ok i ordered 120 sq. ft. of the v1.2 for the area's like the floor, figured I could lay it down and with the factory padding and carpet over it, should be ok.Then for the more important area's (doors,etc.)I got 60 sq. ft. of the se2 stuff.

So how do you guy's think the 6000v.2's compare to say a set of cdt's in that price range? thank's again everyone's been very helpful.//content.invisioncic.com/y282845/emoticons/thumbsupwink.gif.129404938effda6ad9cca39e7f4b58a3.gif

 

[gixxr13 10+ year member]

srry it was saying the server was busy and wouldnt let me post, so i tried three times. guess it was letting me post?//content.invisioncic.com/y282845/emoticons/wallbash.gif.1310150c49dd52e0fbe1813a0681e5c3.gif

 

[gixxr13 10+ year member]

[quote=

So how do you guy's think the 6000v.2's compare to say a set of cdt's in that price range?

need to stop being cheap on my frontstage. how bout the ed 6500s? how do they compare to cdt's in that (325$) price range?