DC XL build 3/4 complete VIDEO

  • 3
    Participant count
  • Participant list
Unplug the sub amp and try the Crunch amp on the subs. See if you can get anything... if you can, then its probably your amp or wiring to your amp imho.

If you unplug the sub amp and the problem persists, then it might be your RCA's, Head Unit, etc

When I mean unplug.....actually unplug it. Remove the 1/0 gauge from your battery so the car doesnt even think you have that amp anymore...so to speak.

You have another amp right there. Just remove the speaker wires, plug in your amp and try it that way bypassing that sub amp altogether.

If you want, you could also use the Crunch amps power/ground/RCA since you know those are working. Just use those in the sub amp. This could possibly test your power/ground runs to the sub amp and the RCA's.

I would still recommend getting a DMM though. I know you said you took it to a shop, but with a $20 DMM you could be in your driveway testing it instead of a shop. Gotta get the right tools!

Typically when I have an issue that I cannot resolve I will remove all the power at the battery. Reconnect 1 amp and 1 ground to 1 amp. Test it. If it works, move to the 2nd power/ground on the 2nd amp with the 1st amp removed. Test it. If it works, then hook both amps up. Basically try to narrow down and troubleshoot. If you know your Crunch amp is fine without the sub amp connected then that is a start. If you know that both amps are fine until you wire them BOTH up, that is another issue...etc..etc..etc

And of course keep looking/posting on the forum here with what you have done or what your results are. Write down what your doing so you dont forget. You could possibly have done troubleshooting method A,B, and D but you totally forgot you didnt do C...and that was the issue. I have skipped stuff or forgot and kicked myself later for it.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Well, I've owned probably over 100 different drivers in the last 40 years and almost every single speaker in the NVX line-up over the last 8...
16
1K
https://www.youtube.com/@therealmatty_s/videos
0
647
I think you're gonna have to get good with fiberglass or something, or find someone with a 3d laser scanner that can 3d print or mold you some...
7
1K
I got to message a DD woofer builder a decent bit my last stent of box designing; they would send me designs to do for or with individual...
5
995
Currently Audison amps 500.1 and 4.300 with kappa 90csx 6x9 component set. Pair of morel 6.5 rear and a single 10” alpine type R.
7
1K

About this thread

thericanballer

10+ year member
God Bless You
Thread starter
thericanballer
Joined
Location
Orlando, FL
Start date
Participants
Who Replied
Replies
2
Views
1,172
Last reply date
Last reply from
hazardous0388
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top