daytonrs 7'' & lpg tweets.need amp

[TrlcKed_OuT 10+ year member]

like it says i have 2 dayton audio rs7'' 4ohm and 2 1'' lpg tweets 8ohm...can i run both on 1 amp being that they are different loads..if so can someone plz tell me how i would do it ?!?

Click to read more...

 

[TrlcKed_OuT 10+ year member]

cmon guys no help??

 

[alphakenny1 10+ year member]

not hard at all. are you using passives? or active? lets say your amp is rated at 75 x 4 @ 4ohms. each speaker gets its own independent channel. your daytons will get 75 watts while the lpg's will get 37.5. thats it. also what amp?

 

[TrlcKed_OuT 10+ year member]

i dont have any extrenal crossovers so it will be active and i havnt picked an amp cus i didnt know you could do it like that so let the 7''s have seperate channels and combine the tweets so they make a 4 ohm load as well correct?!?!..if so im gunna look at a zapco or something very nice...

and thank you for your response and help.

 

[alphakenny1 10+ year member]

whoa whoa. you dont have an external crossover? you need one so you dont blow the LPGs.

dont even worry about the tweeters. they don't need much power to get them to sing. anything above 20 watts rated is perfectly fine. as of right now, i have them getting 42.5 watts and its attenuated by -8db on my HU. thats how loud they can get.

 

[TrlcKed_OuT 10+ year member]

no im just gunna use the crossover on my hu...kenwood 889 and the crossovers on the amp whichever i deside to get...when its time to hook it all up could i may pm u and u could help..ive never messed with front stage and its for a friend....

 

[alphakenny1 10+ year member]

oh, i might be selling my amp if you are interested. and yea pm me for questions or if you are interested in the amp //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif. the usamps is4085.

 

[TrlcKed_OuT 10+ year member]

how much for the amp im kinda on a buget so if not ur amp what would you recomend for under $150 or so....also ever amp i look at the crossovers are like 50-500 that wont work will it seeing how the tweets need to be at lik 2khz and the woofers cant be more than 2khz right!?!?