Dayton spokes??!

[ThatChevyGuy 5,000+ posts]

I got a set of dayton spokes with universal adapter they came off a blazer. think they will fit a fwd? i dont know if i need different shit or what, I think they would, but FWD is usually different.

Click to read more...

 

[blackbonnie 5,000+ posts]

yeah there is some kind of difference in the FWD kit and the RWD kit. i dont know what it is though. and i dont know what could really be that different

 

[revrider1 5,000+ posts]

They will work, just the offset is gonna be more...

 

[ThatChevyGuy 5,000+ posts]

hell yeah, thats what i wanted to hear. thanks

 

[mokedaddy 5,000+ posts]

What size are they? They will most likely stick out and possibly rub but if thats what you are going for....

 

[IgnoreMe 5,000+ posts]

hell yeah, thats what i wanted to hear. thanks

you better make sure the offset will work for your vehicle.

you dont wanna be buying new wheels bearings all the time...

 

[jdawg 5,000+ posts]

standard or reverse? Usaully if the came off a rwd they would have a 5x4.5 (phord) and a 5x4.75 (chevy) bolt pattern adapters. The fwd adapters usaully come in 5x100 and 5x115 bolt patterns. The bolt pattern you probably need more than likley wont be on the adapters. You can get new adapters though for like usaully $200. From Dayton that would probably be twice that. How do you know they are Daytons? Daytons have the symbols and serial numbers stamped in the wheels. You probably have some chinas. Hope you didnt pay alot, usaully can get some 13" or 14" with tires for 4-5 hundred dollars. If you have reverse offset wheels which is more than likley what was on the blazer if they are 15" or smaller they will stick out and the car will look like a dune buggy, if they are 16" or bigger then more than likley they are standard offset and they make stick out 3/4" or so depending on tire size.

 

[97gp 5,000+ posts]

What kind of car are you putting these on, 99 olds intrigue maybe?

 

[quest51210 10+ year member]

non dayton adapters should be no more than $150, dayton adapters are no less than $400

btw your wheels will stick out.

 

[ThatChevyGuy 5,000+ posts]

they are 16" and they arent that bad of offset. I got them for free, but i need different knockoffs and maybe adapters.