Dayton Ref Sheilding Removal

[Berry47 10+ year member]

Anyone have any ideas. I really need to get a baffle behind these in my doors.

Click to read more...

 

[OlogyAudio 10+ year member]

Anyone have any ideas. I really need to get a baffle behind these in my doors.

hit it with a hammer -- the glue is brittle and snaps

 

[JAZN 5,000+ posts]

http://forum.elitecaraudio.com/showthread.php?threadid=102884

 

[sephiroth619 10+ year member]

Is there an audible differene with keeping the magnet on or off?

 

[OlogyAudio 10+ year member]

Is there an audible differene with keeping the magnet on or off?

sure isn't //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif -- the motor structure isolates the coil from the bucking magnet nicely -- making as if the bucking magnet doesn't exist...

 

[squeak9798 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif

The bucking magnet is only there for video shielding. No audible difference with or without it.

And, as mentioned and linked......basically just smack it with a hammer. Don't hit 'er extremely hard though. Just enough to loosen it up.

 

[Berry47 10+ year member]

This is awsome... I know have the depth to put these either in my kicks that are under construction or my doors.

THe kicks are less then 1 ft. center to center from my stock door pods. The daytons will be running from around 40 hz all the way up to around 1.5k. Should I put the daytons or my midrange cdt's in the kicks. The kicks are not angled towards the driver they are merely off axis like the door pod. THanks for the replys.

 

[Berry47 10+ year member]

Well I need new speakers. I followed the directions listed above but for some reason mine separated at eh ebacking plate not the shield. So when I took off the shield it took half of the speaker with it.

I hit it in all the right places and now I am out $80. I'm sort of pissed.

 

[Berry47 10+ year member]

This is what came out. So now I need new midbass drivers that work well IB..

 

[JAZN 5,000+ posts]

aww sorry to hear about that man.

 

[Berry47 10+ year member]

Its cool. I just hooked up my cdt's and did my best to cover the scars from my kick panel augmentation. I haven't run 300 watts rms to the cdt's for a while and I forgot how good it sounds. Maybe I'll try to just leave it for a while.

 

[noob with an RS 10+ year member]

that fuccing succs like shit man. it also discourages me from buyinga n ology audio set.. =0(

 

[audiolife 5,000+ posts]

i was going to suggest a chain saw...but seeing how things went

 

[pelayostyle 10+ year member]

OMG !!! im so sorry man

 

[///M5 10+ year member]

Sorry to hear that. Any recommendations on how to make it so it won't happen if you get another set?