Dayton DVC 15, need 4 ohm power....

[Bobyota 10+ year member]

That's my sub, and it's running off an old Profile Clarus CL800 at 4 ohms (subs rated about 600wrms iirc). I want to find another amp for the sub, still to run at 4 ohms, fairly cheap, and maybe to put out more power at 2 or 1 ohm down the road with a better sub (looking at FIQ15 for example).

Not sure how much it'd matter, but maybe D class this time. The Profile a/b seems a bit inefficient. Also not sure if there's many options for this, but one with bass boost with ability to adjust the boost frequency would be nice (just to try and slightly eq the low end).

Thanks for any ideas //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[ThatChevyGuy 5,000+ posts]

I didn't know they made that in a dual 2....

 

[illbmeubu 10+ year member]

the dayton DVC is dual 4 correct? so you shouldn't be running it at 4 ohms. either 8 or 2 ohms.

 

[ThatChevyGuy 5,000+ posts]

My point exactly, lol.

 

[Bobyota 10+ year member]

The dual 8 ohm voice coils allow for use in a variety of applications and wiring configurations.

It's dual 8, paralleled for 4ohms //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[illbmeubu 10+ year member]

oh ok. i say keep what you got until you're ready to upgrade both your amp and sub setup.

 

[Bobyota 10+ year member]

I would but I'm getting new comps up front and putting the Clarus amp on those.