cvx setup

[xluben 10+ year member]

make it yourself!!!!!

 

[Dynamo8706 10+ year member]

what kind of wood? like where can i get it at? and how do i piece it together? whith glue or what? can i get the wood at like home depot?

 

[dflw_99 10+ year member]

lol, not trying to be a D!ck but he might better have one build:greedy:

 

[Dynamo8706 10+ year member]

lol, not trying to be a D!ck but he might better have one build:greedy:

what did u say?

 

[xluben 10+ year member]

what kind of wood? like where can i get it at? and how do i piece it together? whith glue or what? can i get the wood at like home depot?

sheet of 3/4" MDF, probably $20-25 at HD

wood glue, titebond II, gorilla glue, liquid nails, etc

when putting it together, either pre-drill for screw, or use lots of clamps, or the easiest way: brad nailer!

if you know how to cut wood (or have HD do it, but they're not always accurate) and have a brad nailer, you should be able to finish in a couple hours.

for the driver cutout you'll need a router and something to help you make circles, or freehand it with a jigsaw.

 

[Dynamo8706 10+ year member]

what is a brad nailer? n can i get the wood at home depot?

 

[xluben 10+ year member]

HD = home depot

http://images.google.com/images?q=brad%20nailer&ie=UTF-8&oe=UTF-8&client=firefox-a&rls=org.mozilla:en-USfficial&sa=N&tab=wi

if you don't have an air compressor you probably wouldn't want a brad nailer.

 

[Dynamo8706 10+ year member]

o i c if i make the box im thinking of running a long port underneath the rest of my backseat for more air movement..... u think that will make the sub hit harder?

 

[Dynamo8706 10+ year member]

how much does this amp cost?

here is the link its more expensive than i thought hehe http://www.carbudgetaudio.com/XFILEXR1200D.html

 

[xluben 10+ year member]

o i c if i make the box im thinking of running a long port underneath the rest of my backseat for more air movement..... u think that will make the sub hit harder?

i don't know what you're talking about, but you need at least one port width of room at the port opening for the air to come out.

 

[Dynamo8706 10+ year member]

look at my gallery i want to run the box upright in the gap behind the driver seat n then run a long port under the rest of the seat thats behind the passenger seat u get me? like the size of the box i have already..... the way it runs under the seat