Cut sheet

[MANTI5 10+ year member]

Anyone know an easy to use program that will make cut sheets?

Click to read more...

 

[Phoenix Risen 10+ year member]

your brain.

its not that hard to figure out really,

what are the dims of your box and i can help you out.

 

[MANTI5 10+ year member]

Something along the lines of H: 14, W: 16, D: 12

 

[Phoenix Risen 10+ year member]

ported or sealed?

if its sealed then the top and bottom can be 16x12, front and back can be 12.5x16, and the sides can be 12.5x10.5

it all depends on where you want the joints showing though.

 

[pro-rabbit 5,000+ posts]

It is best to get the enclosure lined out how you want it(design it) then figure out cut sheets

 

[MANTI5 10+ year member]

Thanks and it will be sealed.

 

[pro-rabbit 5,000+ posts]

Thanks and it will be sealed.

If you are going sealed then you need figure out what subs you will be running and what type of sound your looking for out of them. This information will allow you to figure out the amount of air space needed for your application.

 

[MANTI5 10+ year member]

I'm looking to build around 1.5 cubes sealed for a shiva x2, feeding it aound 800 watts rms.

 

[Phoenix Risen 10+ year member]

you a good bit on the small side. your at 1.1 before displacement with that one.

 

[bumpin buick 5,000+ posts]

I use cutlist plus, if you are a torrent guy you should look for it, they have a free trial download as well

 

[MANTI5 10+ year member]

you a good bit on the small side. your at 1.1 before displacement with that one.

Not if those are internal measurements, at least not according to the calculator I was using.

I'll check out cutlist plus, thanks.

 

[Phoenix Risen 10+ year member]

if those are internal then your box dims are actually 15.5Hx17.5Wx13.5D

 

[RAM_Designs 5,000+ posts]

Cut sheets, meh.