Custom Sub Enclosures!!

ssteele18
10+ year member

CarAudio.com Elite
Customizable Sub Enclosures

If you want the best performance for your subs, you have to have a box tailored to their needs! If you want quality boxes without the premium price tag, send me a PM!

Boxes: Custom Sealed or Vented

Coverings: Carpet, Textured Paint, or Custom Vinyl Graphics!

Just PM me the area available, sub specs, any preferences, and budget!

 
Last edited by a moderator:
@Clifff150
c3VwZXJtYW4gZ2xvdy5qcGc.jpg
 
You still building boxes. I need one. I considered a generic one but my subs list the specs and none of the generic ones have tuning listed. The 2 subs I have are image dynamics. It even lists the sub displacement at .07 cu ft. Can you build a box to go in the back of an 98 gmc extended cab. It would be nice to have down firing. I'll have to measure some dimensions if you can build it. I would have posted the link but being my first post it was DENIED. lol Ed

ENCLOSURE SPECIFICATIONS

TYPE OF LISTENER LARGE

NORMAL

SMALL

SEALED VOLUMES GROSS 1.5 cuft. (

INFINITE BAFFLE ok

)

1.25 cuft. .8 cuft

-3db In car \ Free space 16hz \ 42hz 17hz \ 44hz

20hz \ 50hz

PORTED VOLUMES GROSS 2.0 cuft 1.75 cuft

1.5 cuft

Ported Frequency 30hz

32hz 34hz

Port Dimensions 4“ID X 15” 3”ID X 1

1.5” 3.0” ID X 12.375”

-3db In Car \ Free space 18hz \ 30hz 20hz \ 34hz

22hz \ 40hz

SINGLE REFLEX BANDP

***

Net rear volume N/R

1.25 cuft N/R

Net front volume N/R

1.25 cuft N/R

Front ported frequency N/R

59 hz N/R

Port Qty

.

And dimensions N/R 25 SQ IN X 10.75” -OR- 36 SQ IN X 16.5”

12.25”

6.0”

1

1.0”

DIMENSIONS

Speaker displacement .07 cuft.

SPEAKER SPECIFICA

TIONS

IMP

1/4 ohms Nominal Impedance

Re .98/3.8 ohms DC Resistance

Fs 20.7Hz Resonant frequency

Qes .412 Electrical “Q”

Qms 3.80 Mechanical “Q”

Qts .372

T

otal “Q”

V

as 5.71 cuft (162 liters) Equivalent volume

Xmax 17.0mm One way linear

Sd 545 cm2 Cone

Area

Spl 88.6db Sensitivity SPLo

Pwr 250rms/450max Power Handling

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

During my replacement of a factory sub I had my factory plastic enclosure just sitting in the back with my new sub just sitting in it loosely and...
0
1K
Absolutely. I am always learning and think it's probably impossible to stop learning. I appreciate the advice and don't doubt for a second the...
56
4K
  • Locked
15" Custom Sub Dual 1 ohm I've had it running off 2000rms in my daily. I'll include the box if you're in SoCal for pick up, Dimensions are...
0
868

About this thread

ssteele18

10+ year member
CarAudio.com Elite
Thread starter
ssteele18
Joined
Location
St. Cloud, Fl
Start date
Participants
Who Replied
Replies
97
Views
21,150
Last reply date
Last reply from
naughtyca
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0
tip.gif

1aespinoza

    May 22, 2024
  • 0
  • 0

New threads

Top