Sold Custom Cascade prototype 18" for sale.

[Violence. 10+ year member]

dual 1 inch slug y30 ferrite

2500w plus rms

8 layer custom coil w/vented former

dual 2 ohm coil

round aluminum windings

knu kollossus flex 8ga direct connects

quad leads wires

4 hard progressive spiders

custom adapter ring for motor/basket

PSI carbon fiber dustcap

wide roll 18inch cone

direct voice coil vents

pole vent

top plate vents

there are only 2 of these motors. i own them both. these were the omega v2 prototype motors. built these to handle 3k daily with no issues. i rated then conservatively. has a round wire daily coil in it that was custom wound and designed by ssackett. some scratches on the motor from being built and moved around. sub is brand new. i breifly tested it on my home audio setup @ 4ohms. works perfect.

i have a lot of money invested in the 2 of these. going a different route and need to sell these 2. there are no more of these. i own the only 2. the motors are 11" in diameter and 4 inches thick. the adapter plates for the baskets were custom made for these subs.

$550 shipped firm. i will include a extra coil for an additional $55.

Click to read more...

 

[Violence. 10+ year member]

what motors? and you have pics? really dont have a use for them though

some updated pictures.

 

[Violence. 10+ year member]

last bump before i keep them

 

[skmfkr 5,000+ posts]

seems like its a hw, omega, avalanche hybrid. the slugs are the same as a hw and the bottom plate alteast looks like a omega and the dustcap looks like a ava18

 

[Violence. 10+ year member]

these were all custom made. slugs are different the a HW, motor is way bigger then a omega. this was supposed to be the omega v2 proto woofer. both of them. and the dust caps are from PSI