crossover help

[TurdFergueson2 5,000+ posts]

well i wont be using these in my truck they are for my boat to have on them on the lake and out at boca basically tower speakers but much cheaper and i will have 6 1/2's for mids and then 12's for the subs just need somethign extremely loud for vocals like these horns
so those blockers i am hoping will do the trick

Boat............ pics of this mythical sailing vessel.

Your cheap *** just so happens to be running the same amp on the boat and your truck............ FAIL.

 

[king ranch 5,000+ posts]

i have more than one amp retard so you fail, my boat is a 16ft actioncraft flats boat with jackplate and with a 115hp optimax on it, hauls pretty good only weighs 850lbs and shouldnt have that big of a motor on it haha

 

[Horsemanwill 10+ year member]

then u should have ur friends help. when ppl that know what they are doing offer advice you just don't listen i'm done laterz

 

[king ranch 5,000+ posts]

i helped my friends set theirs up after they set it up after i was done it sounded better, but they had bass blockers they got from the place they bought them they were these big yellow round things they connected on the pos terminal next to the horn

 

[Horsemanwill 10+ year member]

coming from somone who runs horns if done correctly you won't need bass blockers. this is the last time i post in the thread

 

[TurdFergueson2 5,000+ posts]

What HU you running in this boat? Lemme guess............the one in your truck right?

I was unaware that that particular Kicker amp could be run in a marine application.

 

[king ranch 5,000+ posts]

yea i know but the amp only goes up to 200hz on highpass and freq on these are 400-9k recommend for 500hz@12db with 150rms so i know i need to block freqs below 500 but what about above 9k

for my boat hu just a cheap lil sony from walmart, and the amp is where its sealed and no water can get to it or moisture the boat doesnt get flodded with water or anything man its sealed off

 

[king ranch 5,000+ posts]

so yep