Component install question!!

[Raffi 10+ year member]

This is the most trouble I've ever been through to get a manual for something..
here's the link for the manual if you need it.

Set your HPF & LPF to 78hz.

OK..78hz it is...Thanks

I am installing Polk EX2550 components

 

[bikinpunk 10+ year member]

You may want to change that later, but you'd have to do that on the amps, and to be honest, 78hz is just fine to cross your subwoofer & midrange at in your application.

 

[Raffi 10+ year member]

So 78hz on my amp or HU? Or both?

 

[ultimate157 5,000+ posts]

So 78hz on my amp or HU? Or both?

Only use one or the other. Playing around with the settings will give you the best sound with your installion, in your vehicle, with your equipment.

 

[bikinpunk 10+ year member]

Only use one or the other. Playing around with the settings will give you the best sound with your installion, in your vehicle, with your equipment.

I would agree. But, most people wind up going with 80hz anyway.

If you go with 78hz, do it from the h/u. There's no need for both.

 

[Raffi 10+ year member]

I feel like an idiot....

So let me get it straight.....

Turn the filter on my 4 channel amp to off and the HPF and LPF on the HU to 78hz..???. At least to start off.

 

[bikinpunk 10+ year member]

I feel like an idiot....
So let me get it straight.....

Turn the filter on my 4 channel amp to off and the HPF and LPF on the HU to 78hz..???. At least to start off.

Yes.

 

[Raffi 10+ year member]

Yes.

So I am not an Idiot....//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif