Only reason I say do the Bit Ten or Bit Ten D is because in a truck....u most likely won't need 8 channels (unless you plan on running a 3 way active up front).
Sounds like you just want the woofers in the door....and the tweeters up top. If you run those active (which means without a crossover block).....then you can run those 4 channels of output on the Bit Ten.....then use the 5th channel for the subwoofer(s). You don't need 8 channels.
From there, an experienced audio guy, will hook ur DSP to a laptop....and tune everything to ur liking. Time alignments, slopes, crossover settings, setting low pass and high pass frequencies, etc. Basically all the stuff u don't wanna deal with lol.
If you can, ask if they'll let you sit in the car with them after they've done the basics......and then make adjustments to YOUR liking. Then when it sounds the way you like it....they can save the settings and u can leave without having to worry about how ur gonna change stuff up once ur gone.
If you get the DRC remote and mount it inside the car, you can set up TWO presets....and use the remote to change between which one. Most people use one preset for playing the music to the driver's liking......and then the second preset for when you have a passenger.
OR.....you can set 1 preset for listening to heavy bass music like rap.....and then 2nd preset for easy listening. However u wanna do it. But I DEFINITELYYYY recommend using a DSP. It makes a world of difference and it allows the installer to dial in mostly EVERY part of the system to your liking.
Sent from my iPhone using Tapatalk