Checking for clipping? Subs still heat up!

[da box king 10+ year member]

well I'll be back on later and check back.....gotta go take the hunting blind down...

jw also is there a way that I can bench or test what my amp is putting out...I read it somewhere, but link?

 

[Noobtastic14 10+ year member]

yeah, but can I safely tune my box to like 34 for them...and I dont have struts broI know what you mean tho, was easy in my gp too

unless your playing straight infrasonic rap constantly while driving i think this is a settings issue MORE than a box issue (although anytime playing below tuning is bad) make sure you have your SSF properly set

-Drew

 

[da box king 10+ year member]

looking for more help...I'll go outside and check my settings again...but they should be good..what do you guys suggest on tuning

 

[mazdakid 5,000+ posts]

your tuning on the box should be fine if its at 37.

 

[da box king 10+ year member]

well I think I'm goin to try an cram some 1/0 into the pox/neg inputs of my crossfire. It's rated for 4 gauge...that may help my voltage. Gonna try making some buss bars too instead of stacking all the terminals on top of each other

 

[mazdakid 5,000+ posts]

are you really using 4 gauge on your amp? i dont think you can get 4000 watts with that wire.