Cheap DD Replicas

Wow...just looked at the pdf.

The knocked-off JVC, Pioneer, DD, Powerbase, volfenhag, kole (funny they knock-off a brand that knocks-off other brands...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif).

 
FWIW- cadance uses that exact frame..

img_0846_797_detail.jpg


the black motor in the back looks similar as well:) (and yes, i know that means little)

 
and yea, i admit... they do look very similar but thats the same with alot of products out there.
Well... I have a dismantled DD 9500G motor right here with me. I've had six other DD subs... and I've measured T/S on the sub in question and the DD subs.

With that being said this motor IS the DD 9500G motor without the horizontal top plate vent channels, and may or may not have the vertical pole piece channels (didn't cut it down).

It has the cross drilled pole, in the same places and the same number, it has the vertical top plate vent channels, it has the same height / winding material coil, it has nearly identical T/S specs except for the suspension is actually stiffer than DD.

It is extremely close to a DD 9500G and was their best effort at copying a 9500G. With 9500G soft parts it would be darn near the same as the 9500G except for the aforementioned lack of horizontal top plate vent channels.

... and remember, I have noted glue joint QC issues, so these aren't miracle subs //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
so all i have to do is buy this sub then get it reconed and it should still be cheaper than buying a regular DD? //content.invisioncic.com/y282845/emoticons/naughty.gif.94359f346c0f1259df8038d60b41863e.gif
I'd like to know if it has the vertical pole channels... my guess is that it does as those are fairly important for making the cross drilled pole vents work properly. It must have been too costly to machine the horizontal vents across the top plate, though.

If it does have the vertical channels the motor is about 95% as good as the 9500G motor... only lacking the small added cooling benefit of those horizontal channels.

 
Just an //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif.. 7elephant has been GREAT so far! i actually paid 2 times (first time was my error) and i called. they called me back already, adn took care of it! also noted the woofers will go out today!

 
this shop in the first page that sells them isa ran out of a booth at the flea market.

not even kidding.

they also sell RE subs and some other quality stuff... but i wouldn't trust anything for warranty or support if you get it and its garbage. these people didn't even KNOW how to make a box bigger than 3 cubes ported. I was gonna have them do my TC uber box custom in the back of the rover and they "couldn't do shaped boxes because they bend the sound and when you bend sound, its like bending light and the DB's will be different than the subwoofer's specs"..

i didn;t call back.

 
this shop in the first page that sells them isa ran out of a booth at the flea market.
not even kidding.

they also sell RE subs and some other quality stuff... but i wouldn't trust anything for warranty or support if you get it and its garbage. these people didn't even KNOW how to make a box bigger than 3 cubes ported. I was gonna have them do my TC uber box custom in the back of the rover and they "couldn't do shaped boxes because they bend the sound and when you bend sound, its like bending light and the DB's will be different than the subwoofer's specs"..

i didn;t call back.
//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

did u ever get to hear those subs tho?

 
meh, he's super slow with his installs //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

i have a box ready. and amps. and i have enough wire left to do it:)

this shop in the first page that sells them isa ran out of a booth at the flea market.
not even kidding.

they also sell RE subs and some other quality stuff... but i wouldn't trust anything for warranty or support if you get it and its garbage. these people didn't even KNOW how to make a box bigger than 3 cubes ported. I was gonna have them do my TC uber box custom in the back of the rover and they "couldn't do shaped boxes because they bend the sound and when you bend sound, its like bending light and the DB's will be different than the subwoofer's specs"..

i didn;t call back.

1st page store is a joke:) already established:)

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

sundownz

Pro Seller
Supporting Vendor
Thread starter
sundownz
Joined
Location
North Carolina
Start date
Participants
Who Replied
Replies
605
Views
55,080
Last reply date
Last reply from
Cameron_B
IMG_1882.jpeg

slater

    Oct 4, 2025
  • 0
  • 0
Screenshot_20251004_120904_Photo Translator.jpg

1aespinoza

    Oct 4, 2025
  • 0
  • 0

New threads

Top