Can't find a 5in x 18in Port

[Ramrod 10+ year member]

I need a 5in Port and I'm having a hard time even finding 5in PVC... I would like to have clear pipe, but will settle for anything as I can just paint it if need be. Would be even better if I can get the horned ends..

Thanks in advance

Click to read more...

 

[72Impala 10+ year member]

Psychoport's aren't happening for awhile I think. Could just make a slot port with .75" or 1" plexi

 

[Ramrod 10+ year member]

Psychoport's aren't happening for awhile I think. Could just make a slot port with .75" or 1" plexi

Looked them up, They are metal...Can that change the sound?

Its for a 4th order Bandpass with a blow through the rear deck...

 

[Jeffdachef 5,000+ posts]

ebay, or your local plumbing store, they should be able to order some.

 

[C1500martin 10+ year member]

heres white

Product Listing PVC-PIPE-SDR26-050

heres clear (but **** its expensive)

Product Listing PVC-CLEAR-PIPE-NSF-Sch40

 

[72Impala 10+ year member]

Looked them up, They are metal...Can that change the sound?
Its for a 4th order Bandpass with a blow through the rear deck...

No. I'm saying psychoport's aren't being made for like 6 months. No the metal is fine. I was talking about ordering 1" thick plexiglass sheets and making a slot port of you wanted clear.

 

[Ramrod 10+ year member]

heres whiteProduct Listing PVC-PIPE-SDR26-050

heres clear (but **** its expensive)

Product Listing PVC-CLEAR-PIPE-NSF-Sch40

Thanks 18in would be $58.. not to bad really.Pushing it thou... but then shipping rapes you at $15... Now it's costing almost $80 for just 18in..

 

[adulbrich 5,000+ posts]

I've got a ton of 6" PVC sitting in my garage. It wasn't cheap, but I could maybe sell some. Shipping would be the biggest cost.

Edit: Never mind, wouldn't be worth it for either of us.

Try Lowes, that's where I bought mine.

 

[fasfocus00 5,000+ posts]

eStreetPlastics - plexiglass acrylic tube store

 

[Ramrod 10+ year member]

eStreetPlastics - plexiglass acrylic tube store

Thank you... Nice find... Not exactly 5in, but 4.75 and 5.75... Very close... hopefully they will work.

Quick question and last one about this link... Having the OD @ 5in and in the ID @ 4.75in... That would be a 1/16th wall thickness.. Is that going to work? Sounds thin......

Also found....

https://www.interstateplastics.com/Acrylic-Clear-Cast-Tube-ACRCLC.php?sku=ACRCLC&vid=201502022248-8p&thickness=5.000&dim2=1.250&dim3=1

 

[C1500martin 10+ year member]

Thank you... Nice find... Not exactly 5in, but 4.75 and 5.75... Very close... hopefully they will work.
Quick question and last one about this link... Having the OD @ 5in and in the ID @ 4.75in... That would be a 1/16th wall thickness.. Is that going to work? Sounds thin......

Also found....

https://www.interstateplastics.com/Acrylic-Clear-Cast-Tube-ACRCLC.php?sku=ACRCLC&vid=201502022248-8p&thickness=5.000&dim2=1.250&dim3=1

what did you end up getting?

I'm on the same boat now but i need 28" of 5" pipe

 

[Ramrod 10+ year member]

Haven't gotten it yet. Just going to go the cheapest route. I would like clear, but that's just too expensive.

 

[Boominburban 10+ year member]

Just get some of that clear paint from JC Whitney... I think it's good for an extra 5hp or maybe 5 db ... idr .....

 

[Boomsday 10+ year member]

I have metal flares and could probably fabricate you something if you needed

 

[C1500martin 10+ year member]

I have metal flares and could probably fabricate you something if you needed

Would you be able to make a 5x28" cylinder?