can i stap,link, 2 memphis st1000d

[1982atm 10+ year member]

like the title says i have 2 st1000d and want to push a dd 9512 or another sub that can handle 2000 watts or so

Click to read more...

 

[pr-festiva 10+ year member]

they use a bridgeing module

 

[1982atm 10+ year member]

thanks .... how does that work like what if the sub is a dvc 2ohm how would that work a amp on each vc or what

 

[pr-festiva 10+ year member]

an amp on each coil would work,, you could also bridge the two together and run each at half ohm but just be carefull.

 

[SicAudio 5,000+ posts]

dont run that st amp @ .5 ohm it will smoke the really old st1600d were .5 stable but that was yrs ago. just voltage match each amp to within 1 volt on the speaker output (roughly 44 - 46 volts a/c current for 1000-1100 watts) using a 50 or 60 hz tone burned to a cd. no speaker hooked up at the time.