I have a sony 500 watt xplod amp I was wondering if I could bridge it so I could get that massive ~300watt load *kidding* , I don't have the instructions and I am a newbie when it comes to this type of stuff. I am running a single dvc 4ohm 10in pioneer championship sub. Any help would be greatly appreciated!
-
3Participant count
-
Participant list
Massive spl
Banned
What's the model number of the amp. No one can tell you anything if we don't know what amp you have. We are not magic
- Thread Starter
- #3
Sorry man, Sony XMN502 2.1. http://www.amazon.com/Sony-XMN502-Channel-500-Watt-Amplifier/dp/B00G9RCYAW
Massive spl
Banned
Sony XM-N502 2-channel car amplifier — 65 watts RMS x 2 at Crutchfield.com
It's bridgeable at 4ohm for 175watt rms
It's bridgeable at 4ohm for 175watt rms
n2audio 5,000+ posts
OPTIDRIVEN
You can bridge it, but you won't get 175.
You will have to wire the coils in series for 8 ohms so you'll get 130w rms.
http://www.sonicelectronix.com/product/img/subwoofer_wiring/1_sub_DVC_4_ohm_2ch_bridged.jpg
You will have to wire the coils in series for 8 ohms so you'll get 130w rms.
http://www.sonicelectronix.com/product/img/subwoofer_wiring/1_sub_DVC_4_ohm_2ch_bridged.jpg
- Thread Starter
- #6
Sick ty
- Thread Starter
- #7
Okay thank you guys for helping me out ☺
Activity
No one is currently typing a reply...
Similar threads
3 ohms speakers are generally what some manufacturers do with factory systems, and wire the components in series. If your amp can do 2 ohm and 4...
- Started by jerialyz
- Amplifiers
- Locked
If I didn't have my two 4500s already I would probably try the Creampie 7500/ Slapz 8k. :poop:
- Started by slapzaudio
- Amplifiers
The question is confusing. Connect the 4" to the radio and use the rear amp channels for the sub. If the sub is DVC you can also use it in stereo...
- Started by Cody012231
- Amplifiers
Mine were as short as possible and still I had issues routing them cleanly
- Started by kanihoncho
- Wiring, Electrical & Installation
About this thread
