can anyone design a box for me ?

[bren]

im wanting to run pioneer ts-w304r 12 inch sub and a crunch ground pounder 1000 watt amp to power it.its going in single cab s10 so top can be 5 inches deep bottom can be 7 inches deep and 15 inches tall and up to 45 inches long.would like to be sq/spl both if possible playing rap ? thank you in advanced

Click to read more...

 

[kingjd7 10+ year member]

The trouble is that sub is 5 5/16"deep. A sealed box with the OD dimensions of 15" high, 5"deep, and 45"wide using 3/4"thick wood is 1.189 cu feet. That sub want a sealed enclosure that is 1.25 cu feet. Use these links to help you figure it out.

Speaker Enclosure Volume Calculator

RE AUDIO - Box Calculator

 

[bren]

the top can be 5 inches the bottom can be 7 sorry for the miss understanding ive had the sub in a box with them depths just not near as long

 

[kingjd7 10+ year member]

No misunderstanding. Are you able to cut the wood to the proper angles to make a angled box? 15" high, 40" wide, 5" top depth, 7" bottom depth. You have 1.35 cu ft. I'm assuming the sub displaces .10. Now you have 1.25 cu ft in a sealed enclosure. I read your sub likes 1.25 sealed. Hope this helps.

 

[bren]

yes that helps thank you and that will give me the max output for the sub ?

 

[kingjd7 10+ year member]

Ported would be the way to go for that, but you might not have enough room.

 

[bren]

can you or do you know anyone who can design a box i tried earlier but had no luck lol

 

[kingjd7 10+ year member]

I gave you all the measurements. What part of Ohio are you in?

 

[kingjd7 10+ year member]

NM I googled it. The two links I gave you should give you pretty much everything you need.