CA.com we have a huge problem

[saywhat? 5,000+ posts]

what the ****? why did he cut a **** corner off.....could of cut the bottom off and kept relatively the same port length. (smaller area=shorter port for same tuning)

 

[tRiGgEr 5,000+ posts]

the dia at the front of the port is 7.5 then it ends at 4

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif you need a new box.

 

[Cahm Rohn 10+ year member]

box is 15x23x40 chunk is 4x4x40 port wall 1 is 13.08x13.5 wall2 is 5.08x13.5 L shaped

 

[Cahm Rohn 10+ year member]

I knew that just tryin see if I could do something with it

 

[Cahm Rohn 10+ year member]

whith the first cut I knew it was over so I just let him work his self.

 

[theCybe 5,000+ posts]

f*ck it

 

[Cahm Rohn 10+ year member]

It look like the saw did just that

 

[mattmcss 10+ year member]

eh, put your sub in it anyways and see how it sounds

 

[Eugenics 5,000+ posts]

whats this 'we' business?

 

[Cahm Rohn 10+ year member]

Well I couldn't say houston but I had help which turned into a huge problem

 

[Cahm Rohn 10+ year member]

Ok now that im calm I will try to shed some light on the situation. When the box was placed in the trunk it would not shut. So to make up for the extra space my neighbor cut out a section that was the shape of the tire well, but by doing this he cut into the port. So I came up with the idea of sealing the port giving me 4.72 cuft and using 4 4in pvc pipes 20 in long to give me 35hz basicly im trying to save this hunk of wood. But the first step is boxing out that section.