bx1000 fried??????help

[xchaosx 10+ year member]

ok here's the deal i pulled my box out to glass it and paint it it was out for about 2 weeks i put it back in and the amp doesn't work now i've seen enough blown amp and that doesn't seem to be the problem all lights are on no protection lights on it clicks like it's kickin on but nothing i switched the rca to see if that was it but nothing usually when a power supply goes bad you get a protection light so this one has me puzzled BTW it worked fine when i pulled the subs out and i didn't pull the amp out so no wireing has changed sorry for the novel

Click to read more...

 

[theCybe 5,000+ posts]

So you took the box out to paint it, and when you removed the subs, you didn't remove the amp; Right?

Didja paint inside the amp? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Is the remote wire connected?

 

[xchaosx 10+ year member]

nope never touched the amp it still lights up like nothings wrong no didn't paint the amp remote power ground is still connected

 

[xchaosx 10+ year member]

anyone else have any ideas

 

[squeak9798 5,000+ posts]

Double check make sure the ground and all fuses are good. Double check all connections. Stick a DMM on the speaker outputs and see if you are getting any voltage. Test the power, ground and REM with the DMM aswell and see what they read.