Buying 4 Subs? DVC4 or DVC2?

[Bobbytwonames 5,000+ posts]

What do most people buy, DVC4 or DVC2, and why? The amp that I will be using does the same power at 1 or 2 ohms (smart 3K).

Click to read more...

 

[Dafaseles]

I would still wire them down to 1 ohm. At 4 ohm, the smart 3 only does I think a little under or a little over 2000 watts. What's really cool about the smart 3 is you could even wire down to .5 ohm and the amp really still only takes enough power to make the 3000 ish watts. It knows not to go crazy with the power and damage itself

 

[Bobbytwonames 5,000+ posts]

I would still wire them down to 1 ohm. At 4 ohm, the smart 3 only does I think a little under or a little over 2000 watts. What's really cool about the smart 3 is you could even wire down to .5 ohm and the amp really still only takes enough power to make the 3000 ish watts. It knows not to go crazy with the power and damage itself

I was thinking of buying 4 DVC4 subs and wire them to two ohms on the Smart3K. So, if I ever did sell the subs, then, I would be able to sell them in pairs and somebody could wire a pair of them to one ohm.

 

[Buck 5,000+ posts]

I would do the 1 ohm if it was my system, but do as you like.

 

[Bobbytwonames 5,000+ posts]

I would do the 1 ohm if it was my system, but do as you like.

The Smart3K does 3K watts at 1 or 2 ohms. So, I can buy either 4-DVC4 or 4-DVC2.

 

[Buck 5,000+ posts]

The Smart3K does 3K watts at 1 or 2 ohms. So, I can buy either 4-DVC4 or 4-DVC2.

Think of rise.