building new box for integra.

[IshbOO 10+ year member]

Just got my integra, wanting to port my fkn rl-ps shit yeah!//content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif

well i had some questions,

is 3inch port width to small? my port would be 24.5x3 and that would be 73.5in^2 port area, each sub needs at least 20in^2 wuld this port be to big? i dont want port noise or anything, and ill be tuning this to 34hz.

Click to read more...

 

[PV Audio 5,000+ posts]

i think that is fine, but you're gonna need a BIG mofukin box to keep the tuning the same with a 25"x3" port cause of that displacement //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[IshbOO 10+ year member]

ok nvm srry, i fixed my problem, im gonna go with 13.5x3 and have a 40.5in^2 port i guess hope its big enough.

 

[bimma85 5,000+ posts]

ok nvm srry, i fixed my problem, im gonna go with 13.5x3 and have a 40.5in^2 port i guess hope its big enough.

That seems kind of small to me, but Im no box expert //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif.

 

[IshbOO 10+ year member]

well the width of my box is going to be 32 inches on the outside, take 3 walls, thats 2.25 inches, i got 29.75 inches of air to put my subs and port into, 12+12+3 = 27, that means i only got 2.75 inches between subs and walls... i was wanting 1 inch from the walls, and 1 inch between the subs, so i would have needed 3 inches, how should i space out my subs? 1 inch between them, and around .8 of an inch from the walls?

 

[PV Audio 5,000+ posts]

dude since u need an EXACT amount of air without much leg room, why not glass?