building Ipipe ported box help

[jlanebpc 10+ year member]

i have a ipipe txxap12w 12'' DVC 1600 w 800 rms and i want to build the best box possible for it. it will be running 2 ohms on a memphis pr1.1000. help please

Click to read more...

 

[THATpurpleKUSH 5,000+ posts]

The manufacturer recommends 1.8-3 cu/ft with port tuning anywhere from 25-37hz. I would go with 2 cu ft at 33hz. I would use either 2 3inch ports or a 4 inch port if using a round port.

Tech Support | TXX Series Specs

 

[RAM_Designs 5,000+ posts]

They'll work well in normal ported boxes. 2-2.5ft^3 in the 30-35hz area.

 

[jlanebpc 10+ year member]

But how do I tune the ports?

 

[AJM511 10+ year member]

But how do I tune the ports?

It's all based on the amount of port area and the amount of airspace in the box. You can buy a box design from several people on this site